Datasheet
04/18/2017 185585 - HPL-ED2017 V31.0 EN 2 / 3
Certifications   CE, UL, CSA
Operating frequency Operations/h 
 3600
Actuating force  n
 5
Tightening torque Threaded ring  Nm 2
Climatic proofing   Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Degree of Protection   IP66, IP67, IP69K (front)
IP65 (on rear)
Mounting position   As required
Mechanical shock resistance, shock duration 11 ms  g > 30
Contacts
Rated impulse withstand voltage U
imp
V AC 4000
Rated insulation voltage U
i
V 250
Overvoltage category/pollution degree   III/3
Control circuit reliability   
At 17 V DC/7 mA H
F
N/O: 1 failure per 17 × 10
6
 switching operations, statistically determined
Max. short-circuit protective device   
Fuse gG/gL A 4
Rated conditional short-circuit current Iq kA 1
Switching�capacity
Rated operational current I
e
A 
AC-15   
24 V I
e
A 4
DC-13   
24 V I
e
A 3
Cable characteristics   
Design   Cable end open
Cable Length  m 1
Material characteristic   PUR
Diameter mm 4.7
Design�verification�as�per�IEC/EN�61439
Technical data for design verification   
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 70
Technical�data�ETIM�6.0
Low-voltage industrial components (EG000017) / Push button, complete (EC001028)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Push-button actuator, complete unit (ecl@ss8.1-27-37-12-28
[AKF046011])
Number of command positions   1
Colour button   Blue
Construction type lens   Round
Hole diameter  mm 22
Width opening  mm 0
Height meter opening  mm 0
Degree of protection (IP)   -
Type of button   Flat
Suitable for illumination   Yes
Switching function latching   No
Spring-return   Yes
Supply voltage lamp  V 24
Number of contacts as normally open contact   1
Number of contacts as normally closed contact   0
Number of contacts as change-over contact   0



