Datasheet

Rated operational current I
e
A 
AC-15   
24 V I
e
A 10
220 V 230 V 240 V I
e
A 6
380 V 400 V 415 V I
e
A 4
DC-13   
24 V I
e
A 10
110 V I
e
A 1
220 V I
e
A 0.5
Supply frequency  Hz max. 400
Short-circuit rating to IEC/EN 60947-5-1   
max. fuse  A gG/gL 6
Repetition accuracy  mm 0.02
Mechanical variables
Lifespan, mechanical Operations
x 10
6
20
Notes   (If approached from the side: 6)
Contact temperature of roller head  °C ≦ 100
Mechanical shock resistance (half-sinusoidal shock, 20 ms)   
Standard-action contact  g 25
Snap-action contact  g 2
Operating frequency Operations/h  ≦ 6000
Actuation
Mechanical   
Actuating force at beginning/end of stroke  N 1.0/8.0
Max. operating speed with DIN cam  m/s 1/1
Notes   for angle of actuation α = 0°/30°
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 6
Heat dissipation per pole, current-dependent P
vid
W 0.13
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 70
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
02/07/2019 Eaton 034868 ED2019 V52.0 EN 2 / 4