Specifications

System Controller

IPN 997-00012-49F November 2012

► To connect a PC/laptop to the SC200 or SC100:

1 Download the latest version of DCTools from: dcpower.eaton.com/downloads.

2 Install DCTools on the PC/laptop.

3 Connect a null-modem cable from the COM1 RS232 port on the PC/laptop to the RS232

connector on the SC200 or SC100.

 Ensure the cable is secured so that no force is applied to the RS232 connector as this may

damage the connector.

 If COM1 port is not available or for more details see Direct RS232 Communications in the

System Controller Operation Handbook.

4 Start DCTools to open the Connection List. Check the box for the COM1 connection.

5 DCTools will now connect to the SC200 or SC100.

 If connection is unsuccessful refer to DCTools help (press F1) or Troubleshooting on page 50.

6 For details of the SC200 or SC100 control and monitoring functions available via DCTools

see System Operation in the System Controller Operation Handbook.

 For help using DCTools press F1.