Specifications

EATON CORPORATION UPS and Power Quality Products Catalogue
66
500VA to 2500VA Portable Power Conditioners
Ordering details
240 Volt In/Out
Rated
Output
VA
Part Number Current
AMPS
(Cont.)
Output
Receptacles
Weight
(kg)
Enclosure
Size (Note
3)
500 210-26-650-00 2.08 2 23 3
1000 210-26-710-00 4.16 3 36 4
2000 210-26-720-00 8.33 3 55 4
2500 210-26-725-00* 10.41 3 66 4
220 Volt In/Out Hardwired Units
Rated
Output VA
Part
Number
Current
AMPS (Cont.)
Weight (kg) Enclosure
Size (Note 3)
500 200-44-650 2.27 23 3
1000 200-44-710 4.55 36 4
2000 200-44-720 9.09 55 4
2500 200-44-725 11.36 66 4
Notes:
1. 240 Volt Hardwired options available to order
2. Special voltage configurations available to order
3. Enclosure sizes (mm) Size 3: 195 (H) x 210 (W) x 328 (D)
Size 4: 252 (H) x 280 (W) x 421 (D)
4. * Input lead fitted with 15 Amp plug top (all other units fitted with 10 Amp
plug tops)
5. Specific input leads and output sockets can be fitted to order
Specifications
Input
Voltage: 220 or 240 Volt AC
Frequency: 50 Hz
Input Voltage Range: + 10%, -20% (±40%)
Protection: ANSI/IEEE C62.41-1980 A and B waveforms
suppressed to safe levels.
Output
Nominal Voltage: 220 or 240 Volt AC
Frequency: 50 Hz
Voltage Regulation: ±3% for +10%, -20% input. +5%, -8% for ±40%
input.
Control: AC on/off switch
Power Efficiency: 90%
Response/Correction
Time:
Return to regulation envelope within 30 msec.
Dynamic Response: Continuous and smooth correction for input
voltage fluctuations.
Overloads
200% of rated load for 10 seconds without
damage. 500% of rated load for 10 msec.
Electrical Noise Attenuation
Transverse Mode: 60 dB typical, (80 dB max.) 4kHz to 20 MHz
Common Mode: 120 dB typical, (140 dB max.) 2kHz to 1 MHz
Output Harmonic
Distortion
Less than 3% THD on linear loads.
No greater than 5% on typical computer loads.
Environmental
Operating Ambient: -20ºC to +50ºC
Relative Humidity: 0 to 95% non-condensing
Ventilation: Natural Convection Cooled
Status Indication
Power On: Amber lamp
Overload Protection
Output short circuit protection
Warranty
5 years
Sola 200/210
Designed and manufactured in Australia, the Sola 200/210 portable
power conditioner provides smooth stepless control of output voltage to
your computer or electronic system, whilst attenuating harmful impulses,
surges and other power line disturbances.
The Sola 200/210 incorporates improved surge withstand capabilities,
as specified by ANSI/IEEE C62.41-1980 and is covered by the SECV
Certificate of Suitability Number CS84292V.
Built to protect
• Programmable logical controls (PLC)
• Photographic equipment
• Remote computer peripherals
• Copiers and laser printers
• Process control equipment
• CNC machinery
• Entire installations