Specifications

63
www.eaton.com/powerquality 1300 UPS UPS
Power Management
Energy Management
System Upgrade Kit
Monitoring: 42 circuits (one panel) or 84 circuits (two panels)
Rating: 208/120V, 380/220V, 400/230V, 415/240V
Configuration: Wall-mounted, standalone unit
Millions of dollars a year are invested in power protection systems such
as UPSs and generators, but problems can still occur at the branch
circuit level due to improper loading or inadequate monitoring. You might
not be able to see trouble coming until a circuit breaker trips, and that’s
too late. Systems go down. Valuable data is lost, and business comes to
a standstill. It can take hours to recover.
The EMS continuously measures the current on all breaker levels and
warns you of impending trouble, so you can take proactive steps. Armed
with these insights, data centre and facilities managers can more
effectively balance loads, prevent overload conditions, plan for future
capacity needs and, where applicable, allocate energy cost among
internal departments.
Extending the reach of the Energy Management System
The EMS has always integrated with Eaton’s latest generation of power
distribution panelboards, power distribution units and remote power
panels. Now a new Eaton Energy Management System Upgrade Kit
is available to extend these branch circuit monitoring capabilities to
existing equipment, from Eaton or others. With the EMS Upgrade Kit,
you bring the entire power distribution system under the support of the
EMS. Even if you have a mix of older equipment from other vendors, you
get the insights to effectively manage the edge of the power distribution
system. You will be able to track and analyse:
• Time-stamped metering, alarm, event and statistical information
• Peak loads, along with current, power and frequency minimums
and maximums
• Voltage and power, monitored all the way down to the branch
breaker level
• Power quality metrics, such as total harmonic distortion (THD) and
power factor (PF)
• Load profiling to make the best decisions for energy planning This
information is shown for individual circuits, each panelboard and at
the equipment level—equipment such as a power distribution unit
(PDU) or remote power panel (RPP)—to provide visibility at all levels in
one system.
Features
• Extends the branch circuit monitoring capabilities of the Eaton
Energy Management System (EMS) to legacy and third-party power
distribution equipment
• Monitors power conditions on individual breakers, panels or at the
equipment level—three tiers of visibility within one unit
• Provides remote monitoring via the Power Xpert
®
Gateway Card,
which links Eaton and non-Eaton equipment to the local area network
or the Internet
• Tracks and records more energy parameters and provides more
standard features than alternative branch circuit monitoring systems
from other vendors
• Delivers real-time and historical information for precision analysis,
troubleshooting, power management, billing and energy planning
• Streamlines and unifies the management of diverse, multi-vendor
power distribution systems