Specifications

59
www.eaton.com/powerquality 1300 UPS UPS
Options to Manage and Monitor Your UPS
Network Management Cards
ConnectUPS Web/SNMP card
Network Card-MS and ConnectUPS Web/SNMP cards are a complete
UPS monitoring, control and shutdown solution in a networked IT
environment. In case of alert the Web/SNMP card can notify users and
administrators through e-mail and SNMP traps. In case of a prolonged
power failure the protected computer systems can be shut down in a
graceful manner with Intelligent Power software. The unique
three-port switching hub on the X-Slot model provides additional
network connections.
Industrial Network Cards
ModBus cards
Network & Modbus Card-MS and X-Slot Modbus cards connect the UPS
to industrial and building management systems using ModBus
RTU protocol.
Power Xpert Cards
Power Xpert Gateway Card"
Power Xpert Gateway cards provide Web-enabled, real-time monitoring
of Eaton UPSs and PDUs through standard onboard Web pages, Power
Xpert Software or third-party software. As an integral part of the Power
Xpert Architecture, the cards provide a central point to connect UPS and
PDUs to an Ethernet network via an X-Slot communication bay.
Relay Cards
Relay/AS400 cards
Relay Card-MS, Minislot Industrial Relay Card and X-Slot Relay cards
are an easy connection to IBM AS/400 series computers as well as
industrial and building management systems.
Other Devices
Environmental Monitoring Probe
Environmental Monitoring Probe (EMP) adds temperature, humidity
and two contact closure monitoring capability to Network Management
Cards and Power Xpert Cards. It is especially well suited for monitoring
rack temperature and door status. Operating system shutdown can be
triggered if user defined thresholds are exceeded or contact closure
status changes.
ViewUPS-X
ViewUPS-X remote display is an LCD panel that lets users view the
status of the UPS from as far as 100 m. ViewUPS-X has also four status
LEDs and an alarm sound. The display is bundled with a dedicated X-Slot
card that also powers the display through the communication cable.
In addition to the remote display connection the card has also a
SELV isolated relay port for connection to monitoring systems and
AS/400 computers.
Network Card-MS