Specifications

47
www.eaton.com/powerquality 1300 UPS UPS
* Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc. Runtimes at 0.7 pf.
Premier Rack Mount 3 Phase UPS for Data Centre & IT Applications
Patented load-sharing control intelligently distributes the workload
among modules without requiring direct synchronisation links among
them. Any module can provide backup support for any other, with no
interruption or downtime. For instance, in a redundant system you could
perform full maintenance on any module without any interruption of
conditioned power to the protected IT equipment.
Meet current and changing requirements with modular architecture
The building block of the Eaton BladeUPS system is a 6U rack-mount
module that provides 12 kW of backup power protection. The system
expands easily to provide maximum results. As your data centre
grows, the system’s modularity plays a key role in optimising your
capital planning and deployment. Using the patented and field-proven
Hot Sync
®
paralleling technology, up to six BladeUPS modules can
be paralleled for extra capacity or redundancy, providing 60 kW of
redundant backup power protection in one 19 inch rack.
YEAR 1:
INITIAL INSTALL
YEAR 3:
EXPANSION
YEAR 5:
FURTHER EXPANSION
42U Eaton
Enclosure
BladeUPS
Parallel Bar for
paralleling UPS
modules
12kW 36kW or 24kW, N+1 60kW, N+1
Redundant N+1 configuration:
Six 12 kW UPS modules share
the load equally. If a UPS
module is removed from
service, the remaining
modules seamlessly support
the load without interruption.
12 kW
Eaton
BladeUPS occupies
6U of space
Total Rack
Space: 24U
Three 12 kW UPS
modules = 36 kW
of backup power
6U electrical
wire-way
BladeUPS - Scalability