Specifications

EATON CORPORATION UPS and Power Quality Products Catalogue
46
Premier Rack Mount 3 Phase UPS for Data Centre & IT Applications
Technology: Double Conversion On Line, On Demand
Rating: 12 to 60 kW N+1 using 12 kW modules
Voltage: 400 Vac, 50/60 Hz
Backup time: 5 minutes typical, extendable
Configuration: Rack-mount
Eaton BladeUPS is the first product on the market to offer a "Online,
Double Conversion On Demand" power technology. This innovative
design takes into consideration the design capabilities of the actual
computer power supplies in such a manner that the UPS furthers
that capability in order to provide an extremely efficient and robust
protection solution without generating additional heat.
The BladeUPS is a rack-mounted three-phase input and three-phase
output uninterruptible power system. Each 12kW module can be
paralleled to achieve a maximum 60 kW N+1 system. Paralleling can be
accomplished for either redundancy or capacity purposes. Each 12 kW
module is identical and can be converted from a single stand alone UPS
to a system capable of being paralleled by simply changing the power
cord. The BladeUPS is designed for computer data centre installations.
Paralleling of the BladeUPS modules takes place in the BladeUPS bar,
which is mounted separately in the rear of the IT rack. This bar provides
the required input and output power connections for 4 or 6 BladeUPS
modules. Each BladeUPS bar comes equipped with fully rated input and
output lugs within a designated wiring area. The protected load can be
connected to the wiring section, or distributed output can be taken in
12 kW increments from the locking output connector on the rear of the
BladeUPS module.
A single BladeUPS module can be connected to the BladeUPS bar, with
additional modules installed to meet future power demands.
Typical applications:
• Data centres with rack mount blade servers
• Telecommunications
Product highlights:
• Minimum efficiency of >98% in normal operation
• Easy to install, configure and deploy
• Fits into standard 19" rack cabinets
• Hot-swappable battery and electronics modules
• Parallel for capacity/redundancy
• Hot Sync
®
redundancy
• Decentralised bypass ensures no single failure point
• ABM
®
prolongs battery life by up to 50%
Options:
• X Slot connectivity options
• Power Xpert
®
software
™
Eaton BladeUPS™