Specifications

EATON CORPORATION UPS and Power Quality Products Catalogue

Premier series 9 scalable UPS

Technology: Series 9 (Double Conversion On Line)

Rating: 5-20kVA Scalable

Voltage: 220-240/380-415 Vac, 50/60 Hz

Backup time: Typical 5-33 min internal (extendable

up to several hours)

Conﬁguration: Rack/Tower convertible

Pay as you grow - The system rating can be easily scaled in 5kVA

increments as your power requirements increase. The MX frame is

a modular system with 5kVA sub-modules paralleled to provide up to

20kVA or 15kVA with redundancy.

Continuous power supply

• Two front access hot-swappables sub-modules (power and battery) for

maintenance without load interruption

• Automatic battery test (test period can be set)

• Internal bypass built-in to supply the load even if the UPS fails

• Large input voltage and frequency ranges to avoid using the

batteries unnecessarily

Total flexibility

• Can be used as a free-standing tower unit with casters or 19”

rack-mounted: only 16U for Eaton MX Frame

• LCD multilingual display with mimic and LEDs for rapid view of the UPS

status, diagnostics and event log

• Outputs: IEC 10A and 16A outlet sockets and hardwired outputs.

• Built-in Powershare system for remote reboot of the equipment

connected, sequential start-up or load shedding while operating from

battery to maintain the power to critical loads

• Eaton MX Frame is compatible with three phase or single

phase supplies

• Backup time: 10 mins up to 2 hours by adding 3U battery

extension modules

Minimum total cost of ownership (TCO)

• More power with an output power factor of 0.9

• Eaton MX Frame is a modular system with 5 kVA sub-modules

paralleled to provide up to 20 kVA or 15 kVA with redundancy

Advanced protection for:

• Departmental networks

• Server clusters

Eaton MX Frame