Specifications

21
www.eaton.com/powerquality 1300 UPS UPS
Eaton 5P Technical Specifications
Rating (VA/W) 650VA / 420W 850VA / 600W 1150VA / 770W 1550VA / 1100W
Format Tower or 1U Rack
Electrical characteristics
Technology Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
Input voltage and frequency
without using batteries
160V-294V (adjustable to 150V-294V) 47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system), 40 Hz in low-sensitivity mode
Output voltage and frequency 230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing)
Connections
Input
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Tower: Fixed line cord 10A
AU 1.8mtr Rack: IEC C14 (10A)
socket
Outputs
Tower: 2 x AU 10A, 3 x IEC
Rack: 4 x IEC C13 (10A) C13
(10A)
Tower: 2 x AU 10A, 3 x IEC C13
(10A) Rack: 4 x IEC C13 (10A)
Tower: 2 x AU 10A, 3 x IEC C13
(10A) Rack: 6 x IEC C13 (10A)
Tower: 2 x AU 10A, 3 x IEC C13
(10A) Rack: 6 x IEC C13 (10A)
Remotely controlled sockets
Tower: 2 x 10A AU individually
switched
Tower: 2 x 10A AU individually
switched
Tower: 2 x 10A AU individually
switched
Tower: 2 x 10A AU individually
switched
Rack: 2 x IEC C13 (10A)
individually switched
Rack: 2 x IEC C13 (10A)
individually switched
Rack: 2 x IEC C13 (10A)
individually switched
Rack: 2 x IEC C13 (10A)
individually switched
Batteries Typical backup times for 50 and 70% load*
5P 9/5.5 mins 12/7.5 mins 12/7.5 mins 13/8.5 mins
Battery management
ABM & Temperature compensated charging method (user selectable), Automatic battery test, deep discharge protection, to
automatic recognition of external battery units.
Interfaces
Communication ports
1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously) + 1 mini terminal block
for remote ON/OFF or Remote Power Off
Communications card slots 1 slot for NETWORK-MS, MODBUS-MS or RELAY-MS cards
Operating conditions, standards and approvals
Operating temperature Models 650, 850 & 1550 = 0ºC to +35ºC, Model 1550 = 0ºC to +40ºC
Noise Level < 40dBA
Performance - Safety - EMC IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 (EMC), IEC/EN 62040-3 (Performance), C-Tick
Approvals CE, CB Report(TUV), C-Tick
Dimensions W x D x H / Weight
UPS Dimensions (mm) & weight
(kg)-Tower
150 x 345 x 230mm / 7.8kg 150 x 345 x 230mm / 10.4kg 150 x 345 x 230mm / 11.1kg 150 x 445 x 230mm / 15.6kg
UPS Dimensions (mm) & weight
(kg)-Rack
438 x 364 x 43.2mm(1RU) /
8.6kg
438 x 509 x 43.2mm(1RU) /
13.8kg
438 x 509 x 43.2mm(1RU) /
14.6kg
438 x 554 x 43.2mm(1RU) /
19.4kg
Customer Service & Support
Warranty 3 years on electronics, 2 years on batteries
Part Numbers
5P Tower 5P650AU 5P850AU 5P1150AU 5P1550AU
5P Rack 5P650iR 5P850iR 5P1150iR 5P1550iR
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
Premier high density series 5 protection for network devices
1. Communications card slot
2. Remotely switchable outlet groups
3. Remote On/Off, Remote Power Off terminal
4. USB Port
5. Serial Port
6. Primary outlet group
Eaton 5P 1550 tower and rack