Datasheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch lockable 20 A 690 V 1 x 90 ° Yellow, Red T0-1-102/EA/SVB 1 pc(s)

10/26/2017 091078 - HPL-ED2017 V37.0 EN 1 / 6

Main�switch,�2�pole,�20�A,�Emergency-Stop�function,�90�°,�Lockable�in�the

0�(Off)�position,�flush�mounting

Part�no. T0-1-102/EA/SVB

Catalog�No. 091078



EL-Nummer

(Norway)

1417106

Delivery�program

Product range   Main switch

maintenance switch

Repair switch

Part group reference   T0

Stop Function   Emergency switching off function

   With red rotary handle and yellow locking ring

Number of poles   2 pole

Locking facility   Lockable in the 0 (Off) position

Degree of Protection   Front IP65

Design   flush mounting

  

Contact sequence  

Switching angle  ° 90

Function  

Motor�rating�AC-23A,�50�-�60�Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Number of contact units  contact

unit(s)

Technical�data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

Climatic proofing   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

Enclosed  °C -25 - +40

Overvoltage category/pollution degree   III/3

Rated impulse withstand voltage U

imp

V AC 6000

Mechanical shock resistance  g 15

Mounting position   As required

Protection against direct contact when actuated from front (EN 50274)   Finger and back-of-hand proof

Summary of content (6 pages)

PAGE 1
Main�switch,�2�pole,�20�A,�Emergency-Stop�function,�90�°,�Lockable�in�the 0�(Off)�position,�flush�mounting Delivery�program Part�no. Catalog�No.
PAGE 2
Contacts Mechanical variables Number of poles 2 pole Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 20 Note on rated uninterrupted current !u Rated uninterrupted current Iu is specified for max. cross-section. Load rating with intermittent operation, class 12 AB 25 % DF x Ie 2 AB 40 % DF x Ie 1.6 AB 60 % DF x Ie 1.
PAGE 3
230 V P kW 3 400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Switching capacity Maximum motor rating Single-phase 120 V AC HP 0.5 200 V AC HP 1 240 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 7.5 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 50 High fault rating kA 10 max. Fuse A 20, Class J AWG 18 - 14 Terminal capacity Solid or flexible conductor with ferrule Terminal screw M3.5 Tightening torque lb-in 8.
PAGE 5
10.12 Electromagnetic compatibility Is the panel builder's responsibility. The specifications for the switchgear must be observed. 10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. Technical�data�ETIM�6.
PAGE 6
Dimensions ZFS-... Label mount not included as standard Drilling dimensions door 3 padlocks Additional�product�information�(links) IL03801020Z�(AWA1150-0586)�Cam�switch:�Mounting IL03801020Z (AWA1150-0586) Cam switch: Mounting ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL03801020Z2016_07.pdf Form for ordering non-standard front plates http://ecat.moeller.net/flip-cat/?edition=HPLEN&startpage=4.87 Display flip catalog page. http://ecat.moeller.