Specifications

Product Snapshot
Type: Environmental monitoring device
Package Contents: Main unit, User's guide, Double-sided
Velcro tape
Compatibility: 10/100Mb ConnectUPS-X, ConnectUPS-BD
and ConnectUPS-E with FW V3.01 and
higher
Dimensions (LxWxH): 2.26 x 1.48 x 1.15 (inches)
57.6 x 37.6 x 29.3 (mm)
Weight: 1.19 oz. (34g)
Part Number: 116750224-001
The Eaton
®
Environmental
Monitoring Probe (EMP)
enables you to remotely monitor
environmental conditions as
easily as you monitor power
conditions. Using a standard
Web browser, you can view
the ambient temperature
and humidity of the remote
environment, as well as the
status of two additional contact
devices, such as a smoke
detector or open-door sensor.
Compatible with any
Eaton UPS
The EMP can be used with any
Eaton uninterruptible power
system (UPS) equipped with any
Powerware ConnectUPS Web/
SNMP card (the device that
connects the UPS to an Ethernet
network or the Internet).
Simple, in-service
installation
The EMP is connected to a
communication port on the
ConnectUPS card using standard
CAT5 cable - and can be located
up to 20m (65.6 feet) away.
Broad monitoring range
The EMP can monitor and
measure temperatures between
-20°C and 80ºC, relative humidity
between 10 and 90 percent, and
contact state for two additional
devices or sensors that are
plugged into the EMP.
User-configurable alarm
thresholds
An easy-to-use screen lets you
define acceptable ranges for
temperature and humidity, and
normal contact closure status—
and action to take during alarm
conditions.
Real-time display of
environmental conditions.
Simply point your Web browser
to the IP address of the
ConnectUPS card for a display
of current status. You can
access this information from
a PC, Internet-ready wireless
device, or SNMP management
software.
Automated notification of out-
of-range conditions. When
acceptable temperature or
humidity limits are exceeded
or contact status changes, the
EMP automatically logs the
event and notifies key personnel
by email, PCS digital phone or
pager.
Automated, remote
shutdown
Working with NetWatch
software, the EMP can direct
orderly shutdown of equipment
when alarm conditions persist
for a specified period, from one
to 600 seconds.
The EMP adds an extra layer of
protection by monitoring remote
environmental conditions,
notifying appropriate personnel
of problem conditions, and
initiating action to shut down
systems if necessary to protect
them from harm.
Eaton Environmental Monitoring Probe
Features
s -ONITORSTEMPERATUREHUMIDITYANDSTATUS
of two contacts/sensors
s 7ORKSWITHANY%ATON503WITHANY
ConnectUPS Web/SNMP card
s #OMPATIBLEWITH0OWER6ISION
®
Data
Acquisition Terminal (DAT)
s #ANBELOCATEDUPTOMETERSFEET
from the UPS
s -EASURESAMBIENTTEMPERATURESBETWEEN
-20°C and 80°C
s -EASURESRELATIVELYHUMIDITYBETWEENAND
90 percent
s $ISPLAYSSTATUSON7EBPAGE)0PHONEOR0$!
ORNETWORKMANAGEMENTSYSTEM
s 3UPPORTSUSERDEFINEDTHRESHOLDSFORTEMPERA-
TUREHUMIDITYANDCONTACTCLOSURESTATUS
s 3UPPORTSGRACEFULSHUTDOWNOFAFFECTED
equipment
s !UTOSENDSALARMSVIAEMAIL0#3PHONE
or pager
s 3ENDS3.-0ALARMSTONETWORKMANAGEMENT
SYSTEMS
s 5SER)NTERFACESUPPORTFORLOCALLANGUAGES
(English, Chinese, Spanish, French, German,
)TALIANOTHER
s 4WOYEARLIMITEDWARRANTYOPTIONFORENHANCED
WARRANTY53AND#ANADA
PowerChain Management solutions
Remote monitoring of temperature,
HUMIDITYANDUSERSUPPLIEDCONTACTDEVICES