Specifications
SITE PLANNING DATA SYSTEM 9395-825 PLUS 1 ISBM, MODELS 650, 750, 825kVA, SINGLE MODULE
MBB
MBP
MIS
AC OUTPUT
TO LOAD
BYPASS
AC INPUT
RECTIFIER
AC INPUT
UPS MODULE
MAINTENANCE BYPASS SWITCHGEAR (OPTION)
BATTERY
ISBM
UPM1
Product Specifications
UPS Rating
AC Input
Voltage
AC
Output
Voltage
Rectifier AC
Input
Current
Inverter AC Output
Current
Max. Heat
Dissipation at
100% Load
Dimensions WxDxH
Max. Weight
Unpacked
Floor Loading
Battery Nameplate
Current
(240 Cell,
2.00 V/cell)
Max. Battery Current
at End of Discharging
(240 Cell, 1.67V/cell)
Nameplate Nameplate
kVA kW VAC VAC AMP AMP
kW(BTU/hr) mm(in) kg(lbs) kg/m2(lb/ft2)
AMP AMP
650 591 480 480 892 782
37.2 (126842)
4308x874x1877
(169.6x34.4x73.9)
3143 (6930) 835 (171)
1280 1560
UPM1ISBM UPM2 UPM3UPM4
UPM3
UPM2
UPM4
Notes:
1. Inverter AC output current calculation: Nameplate - 100% rated output load.
2. Bypass AC input current calculation is based on 100% rated output.
3. The system must be installed on a level floor suitable for computer or electronic equipment.
4. The system must be installed in a temperature and humidity controlled indoor area
free of conductive contaminants.
5. Ambient temperature range: 0-40C (32-104F); Recommended operating range: 20-25C (68-77F);
Maximum relative humidity: 95% non-condensing.
6. Minimum overhead clearance for ventilation above the UPS cabinet is 457mm (18in.).
7. Minimum 915mm (36in.) clearance in front of the UPS cabinet is required for cooling air intake
and servicing space.
8. The UPS cabinet can be installed in line-up-and-match or standalone configurations.
9. Top and bottom cable entries through removable access plates are standard for all configurations.
Access plates shall be custom-modified to suit conduit sizes.
10. All wiring is to be in accordance with National and Local Electric Codes.
11. AC input to UPS rectifier (0.98 min.pF): (3) phases, (1) ground.
AC output to load: (3) phases, (1) neutral if required, (1) ground.
AC input to UPS bypass: (3) phases, (1) neutral if required, (1) ground.
DC input from battery to UPS: (1) positive, (1) negative, (1) ground.
12. The front panels must be removed to meet the 830mm (or 32.7" depth) to fit through doors.
13. If the UPS is to be installed with the right side near a wall a minimum of 6" is required between the
wall and the unit. If a battery cabinet is installed to the right of the UPS the 6" are not required.
14. Specifications are subject to change.
825 750 480 480 1132 992
47.2 (160991)
4308x874x1877
(169.6x34.4x73.9)
3143 (6930) 835 (171)
1600 1981
750 682 480 480 1029 902
42.9 (146356)
4308x874x1877
(169.6x34.4x73.9)
3143 (6930) 835 (171)
1503 1800
P
/
N 11
0
1
00
21
5
-
00
1
S
h
eet
11
o
f 1
3
R
e
v. 4
CB1 (OPTION)
Page: 1 of 1
4
308
x
8
74x
18
7
7
4
7.2
(
160991
)
3143
(
6930
)
8
35
(
171
)
82
5 75
0
480
480
1132
992
1600
1981
(
169.6x34.4x73.9
)
8
2
5
k
V
A
,
S
I
T
E
P
L
A
N
N
I
N
G
D
A
T
A
S
Y
S
T
E
M
9
3
9
5
-
8
2
5
P
L
U
S
1
I
S
B
M
,
M
O
D
E
L
S
S
I
N
G
L
E
M
O
D
U
L
E