Specifications

FieldServer Technologies, 1991 Tarob Court, Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: [phone], FAX: [phone], Toll-Free: 888-509-1970 Email: [e-mail]
QuickServer
Options
FS-8915-36-QS Accessory Kit, 110/220V
The Accessory Kit consists of a temporary power supply, Ethernet cable, Screwdriver, DIN Rail Mount, and USB flash drive of all
manuals, data sheets, Discovery tool and ENotes.
Specifications
Serial-Ethernet Dimensions
Serial-Ethernet-LonWorks Dimensions
4/2013
Other
 Configuration/Diagnostic utilities
 Capacity: 250 points FS-QS-11XX(500 points FS-QS-12XX)
 Table, Wall or DIN rail mount
Communication
 Baud: 4800, 9600, 19200, 38400, 57600, 115200
 Start Bit: 7, 8
 Stop Bit: 1, 2
 Parity: Even, Odd, None
Approvals
 TUV approved to UL 916 and CSA C22.2 standards
 BTL Mark
 LonMark Certified (FS-QS-1011 and FS-QS-12X1)
 RoHS Compliant
 GOST-R Certified
 CE and FCC
LonMark Certification on the QuickServer FS-QS-1XX1-XXX
 SPID: 80:00:95:46:00:84:04:01
 Profiles:
0000 - Node object (1)
0001 - Open Loop Sensor Object (5)
0003 - Open Loop Actuator Object (5)
Field Connections
1. TX/Rx/GND 4. 10/100 Base T
2. +/-/Frame Ground 5. FTT10
3. See Manual 6. KNX/EIB TP1
Environment
 Operating temperature: -40 to 75
o
C (-40 to 167
o
F)
 Relative humidity: 5-90% RH non-condensing
Power Requirements
 9-30 VDC or 12-24 VAC
 Current draw @ 12V
♦ FS-QS-1010, FS-QS-12X0: 150 mA
♦ FS-QS-1011, FS-QS-12X1: 279 mA
Physical Dimensions (HxWxD)
 4.5 x 2.9 x 1.6 in. (11.5 x 7.4 x 4.1 cm)
 0.4 lbs (0.2 Kg)
Ordering Information
QuickServer is available in multiple driver configurations. Check the website (www.fieldserver.com/QuickServer/) for specific part
numbers.
Model - QuickServer - Model - 2
nd
Serial Port* - LonWorks - Protocols
FS-QS - 1 = QuickServer - 0 = BAS - 1 = RS-485 - 0 = None - 4 digit protocol code
- 2 = Enhanced - 2 = RS-232 - 1 = LonWorks
- 3 = RS-422
- 4 = KNX
* RS-232/RS-422 / KNX FS-QS-12XX only