Specifications
7
EATON Power Xpert 9395 UPS Eaton.com/9395
400 kVA
Batt
Dist
Batt
Dist
Batt
Dist
400 kVA 400 kVA
Tie
or
SBM
Greatly reduced footprint
The 9395 UPS offers the smallest footprint and lowest weight of
any UPS in its class—50 to 60 percent less than competitive units.
)NFACTTHElTSAREDUNDANTDESIGNINTOTHESAMEFOOTPRINT
as a traditional, non-redundant UPS. The 9395’s smaller footprint
not only reduces your total cost of ownership, but also provides a
UPS that's approximately half the weight of legacy and competitive
systems. As a result, freight costs are much lower and the smaller
SIZEANDWEIGHTOFTHE503MAKEITMUCHEASIERTOHANDLE)NFACT
the 9395 fits easily through all doors and can be transported on
freight elevators. Unlike some larger and heavier systems, there's
is no need to dismantle it to fit it on elevators or through doorways,
which can cause significant delays and increase costs.
Minimized cabling requirements and expense
)NANINTEGRATEDSYSTEMSUCHASTHEMULTIMODULESYSTEMS
arrive pre-wired with no need to perform costly and time-
consuming inter-unit cabling for power and communications
BETWEENMODULESANDTHESYSTEMBYPASSUNIT#ONSIDERINGTHE
increasing cost for raw materials such as copper, this savings
CANBESIGNIlCANT#ABLINGENTERSTHE503FROMEITHERTHE
TOPORBOTTOMOFTHECABINETTOPROVIDEEASIERANDMOREmEXIBLE
installation.
UPM
4
UPM
1
UPM
2
UPM
3
ISBM
AC Input AC Bypass
Load
9395 solution
39 sq. ft.
6,365 lb system weight*
Minimal site wiring
*Excluding batteries
Competitor solution
125 sq. ft.
19,215 lb system weight*
Extensive site wiring
*Excluding batteries
825 kVA N+1: 9395 vs. Competitor
AC Input
AC Bypass
UPS Output










