Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 10 A 1 x 90 ° Grey, Black TM-1-8290/E 1 pc(s)

DATASHEET - TM-1-8290/E

ON-OFF switches, TM, 10 A, ﬂush mounting, 1 contact unit(s), Contacts: 1,

90 °, maintained, With 0 (Oﬀ) position, 0-1, design no. 8290

Part no. TM-1-8290/E

Catalog No. 070131



Delivery program

Product range   Control switches

Part group reference   TM

Basic function   ON-OFF switches

   with black thumb grip and front plate

Contacts   1

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 90

Switching performance   maintained

With 0 (Oﬀ) position

Design number   8290

Front plate no.  

front plate   0-1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 3

Rated uninterrupted current I

A 10

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, CSA, UL

Control switch as per IEC/EN 60947-5-1

Auxiliary switch as per IEC/EN 60947-5-1

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

Overvoltage category/pollution degree   III/3

06/16/2021 Eaton 070131 ED2021 V80.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - TM-1-8290/E ON-OFF switches, TM, 10 A, ﬂush mounting, 1 contact unit(s), Contacts: 1, 90 °, maintained, With 0 (Oﬀ) position, 0-1, design no. 8290 Part no. Catalog No.
PAGE 2
Rated impulse withstand voltage Uimp V AC Mounting position 4000 As required Contacts Electrical characteristics Rated operational voltage Ue V AC 500 Rated uninterrupted current Iu A 10 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section. Short-circuit rating Fuse A gG/gL 10 Switching capacity Safe isolation to EN 61140 Current heat loss per contact at Ie W 0.15 Current heat loss per auxiliary circuit at Ie (AC-15/230 V) CO 0.
PAGE 3
Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 10 Heat dissipation per pole, current-dependent Pvid W 0.15 Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 50 IEC/EN 61439 design veriﬁcation 10.
PAGE 4
Switching power at 400 V kW 0 Conditioned rated short-circuit current Iq kA 0 Number of poles 1 Number of auxiliary contacts as normally closed contact 0 Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as change-over contact 0 Motor drive optional No Motor drive integrated No Voltage release optional No Device construction Built-in device ﬁxed built-in technique Suitable for ground mounting No Suitable for front mounting 4-hole Yes Suitable for
PAGE 5
Door drilling dimensions 06/16/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 070131 ED2021 V80.