Datasheet

26
Power Distribution for UPS
Flex PDU / HotSwap MBP / Comet PDU
FlexPDU - Having the right connectors just where you need
them
HotSwap MBP- High availability for all UPSs up to 3 kVA
Comet PDU - Socket blocks for single phase UPS with
output terminal blocks
FlexPDUs (Power Distribution Units) are flexible mounting •
multiway socket blocks for easy connection of multiple loads or
either free standing or rack-mounted UPSs
FlexPDUs have a large number of sockets (12 IEC 10A sockets) •
which fit into a very compact unit (1U - 19")
FlexPDUs are easy to implement into any type of installation: •
they can be rack mounted horizontally (1U) or vertically or
directly onto all MGE RT format (rack/tower) UPSs
HotSwap MBP provides a maintenance bypass for all UPSs •
up to 3 kVA: UPSs can be hot swapped or upgraded without
interrupting the power supply
HotSwap MBP has an IEC16A input connector with retaining •
clip for compatibility with any UPS now and in the future from
Eaton or any other supplier
HotSwap MBP units can be installed as required; at the back, •
side, top of the UPSs, or rackmounted (horizontally (1.5U) or
vertically)
Comet PDUs (Power Distribution Units) make it easy to •
connect equipment to single phase UPS with output terminal
blocks (Comet EX RT, etc)
Comet PDU Power Distribution Units contain 8 IEC 10A and 4 •
IEC 16A sockets on a 2U rack mounting module
All the outputs have retaining clips for highly reliable •
connections