Datasheet

20
Superior de-centralised power protection for medium to high
MX
Two front access hot-swappable sub-modules (power and •
battery) for maintenance without load interruption
Automatic battery test•
Internal bypass built-in to supply the load, even if the UPS fails•
Large input voltage and frequency ranges to avoid using the •
batteries unnecessarily
More power with an output power factor of 0.9•
When the power supply needs to be upgraded, the MX •
5000 can be paralleled to provide 8 kVA or 10 kVA using the
ModularEasy kit: without extra cost on the initial purchase
MX Frame is a modular system with 5 kVA sub-modules •
paralleled to provide up to 20 kVA or 15 kVA with redundancy
Solution Pac 2 suite supplied for remote supervision•
Intelligent Power Manager for supervision via Ethernet. IPM •
is compatible with standard network management systems
(Tivoli, CA unicenter, HP Openview)
Compatible with Network Shutdown Module for monitoring a •
number of UPS and shutting down the servers on the network
Can be used as a free-standing tower unit or 19" rack-mounted: •
only 3U for MX 5000 and 15000 16U for MX Frame
LCD multilingual display with mimic and LEDs for rapid view of •
the UPS status, diagnostics and event log
Outputs: IEC 10A and 16A outlet sockets and hardwired •
outputs
Built-in Powershare system for remote reboot of the •
equipment connected, sequential start-up or load shedding
while operating from battery to maintain the power to critical
loads
MX Frame is compatible with three phase or single phase •
supplies
Backup time: 10 mins up to 2 hours by adding 3U battery •
extension modules
Continuous power supply
Minimum total cost of ownership (TCO)
CommunicationsFlexible
Technology: Level 9 (Double Conversion Online)
Rating: 5 - 20 kVA
Configuration: Tower / Rack Convertible