Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 20 A 1 x 90 ° Grey, Black T0-1-8200/E 1 pc(s)

DATASHEET - T0-1-8200/E

On-Oﬀ switch, 1 pole, 20 A, 90 °, ﬂush mounting

Part no. T0-1-8200/E

Catalog No. 067352



EL-Nummer

(Norway)

0001456240

Delivery program

Product range   On-Oﬀ switch

Part group reference   T0

   with black thumb grip and front plate

Number of poles   1 pole

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 90

Switching performance   maintained

Design number   8200

Front plate no.  

front plate   0-1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

06/18/2021 Eaton 067352 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T0-1-8200/E On-Oﬀ switch, 1 pole, 20 A, 90 °, ﬂush mounting Delivery program Part no. Catalog No. T0-1-8200/E 067352 EL-Nummer (Norway) 0001456240 Product range On-Oﬀ switch Part group reference T0 with black thumb grip and front plate Number of poles 1 pole Degree of Protection Front IP65 Design ﬂush mounting Contact sequence Switching angle ° 90 Switching performance maintained Design number 8200 Front plate no.
PAGE 2
Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Mechanical variables Number of poles 1 pole Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 20 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section.
PAGE 3
AC-23A Motor rating AC-23A, 50 - 60 Hz P kW 230 V P kW 3 400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Pilot Duty A 600 P 300 Switching capacity Maximum motor rating Single-phase 120 V AC HP 0.5 200 V AC HP 1 240 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 7.5 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 50 High fault rating kA 10 max. Fuse A 20, Class J AWG 18 - 14 Terminal capacity Solid or ﬂexible conductor with ferrule Terminal screw M3.5 Tightening torque lb-in 8.
PAGE 5
10.11 Short-circuit rating Is the panel builder's responsibility. The speciﬁcations for the switchgear must be observed. 10.12 Electromagnetic compatibility Is the panel builder's responsibility. The speciﬁcations for the switchgear must be observed. 10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaﬂet (IL) is observed. Technical data ETIM 7.
PAGE 6
Degree of Protection IEC: IP65; UL/CSA Type 1, 12 Dimensions ② ZFS-... Label mount not included as standard 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 067352 ED2021 V80.