Data Sheet

DATASHEET - DILK50-10(230V50HZ,240V60HZ)
Contactor for capacitors, with series resistors, 50 kVAr, 230 V 50 Hz, 240 V
60 Hz
Part no. DILK50-10(230V50HZ,240V60HZ)
Catalog No. 294076
Alternate Catalog
No.
XTCC050D10F

Delivery program
Product range   DILK Contactors for capacitors
Application   Contactors for power factor correction
Description   with series resistors
Rated power of AC-6b three-phase capacitors, 50 - 60 Hz
  
Open   
230 V Q kVAr 25
400 V Q kVAr 50
525 V Q kVAr 65
690 V Q kVAr 85
Contact sequence  
Actuating voltage   230 V 50 Hz, 240 V 60 Hz
Instructions In the case of group compensation multi-stage capacitor banks are connected to the mains, as required. Transient currents of up to 180×Ie could flow between the capacitors.
The capacitors are pre-charged via the early-make auxiliary contacts and the fitted wire resistors, thereby reducing the inrush current. The main contacts then close in a time-delayed manner
and bring about the continuous current. Due to their special contacts, the contactors for the capacitors are weld-resistant for capacitors with inrush current peaks
Due to their special contacts, the contactors for capacitors are weld-resistant for capacitors with inrush current peaks up to 180 × l
e
.
Technical data
General
Standards   IEC/EN 60947
Ambient temperature   
Open  °C -25 - +60
Enclosed  °C - 25 - 40
Mounting position  
Degree of Protection   IP00
Protection against direct contact when actuated from front (EN 50274)   Finger and back-of-hand proof
Altitude  m Max. 2000
Weight basic unit   
AC operated  kg 1.171
Terminal capacity main cable   
Solid 
mm
2
1 x (2.5 - 16)
Flexible with ferrule 
mm
2
1 x (2.5 - 35)
Stranded 
mm
2
1 x (16 - 50)
Solid or stranded  AWG 12 - 2
Flat conductor Lamellenzahl
x Breite x
Dicke
mm 1 x (6 x 9 x 0.8)
06/18/2021 Eaton 294076 ED2021 V80.0 EN 1 / 5