Data Sheet
DATASHEET - DILK25-11(230V50HZ,240V60HZ)
Contactor for capacitors, with series resistors, 25 kVAr, 230 V 50 Hz, 240 V
60 Hz
Part no. DILK25-11(230V50HZ,240V60HZ)
Catalog No. 294032
Alternate Catalog
No.
XTCC025C11F
Delivery program
Product range DILK Contactors for capacitors
Application Contactors for power factor correction
Description with series resistors
Rated power of AC-6b three-phase capacitors, 50 - 60 Hz
Open
230 V Q kVAr 15
400 V Q kVAr 25
525 V Q kVAr 33.3
690 V Q kVAr 40
Contact sequence
Actuating voltage 230 V 50 Hz, 240 V 60 Hz
Instructions In the case of group compensation multi-stage capacitor banks are connected to the mains, as required. Transient currents of up to 180×Ie could flow between the capacitors.
The capacitors are pre-charged via the early-make auxiliary contacts and the fitted wire resistors, thereby reducing the inrush current. The main contacts then close in a time-delayed manner
and bring about the continuous current. Due to their special contacts, the contactors for the capacitors are weld-resistant for capacitors with inrush current peaks
Due to their special contacts, the contactors for capacitors are weld-resistant for capacitors with inrush current peaks up to 180 × l
e
.
Technical data
General
Standards IEC/EN 60947
Ambient temperature
Open °C -25 - +60
Enclosed °C - 25 - 40
Mounting position
Degree of Protection IP00
Protection against direct contact when actuated from front (EN 50274) Finger and back-of-hand proof
Altitude m Max. 2000
Weight basic unit
AC operated kg 0.51
Terminal capacity main cable
Solid
mm
2
1 x (0.75 - 16)
Flexible with ferrule
mm
2
1 x (0.75 - 16)
Stranded
mm
2
1 x 16
Solid or stranded AWG 18 - 6
Flat conductor Lamellenzahl
x Breite x
Dicke
mm -
Rated power of AC-6b three-phase capacitors, 50 - 60 Hz
Open
06/18/2021 Eaton 294032 ED2021 V80.0 EN 1 / 5





