Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 20 A 1 x 90 ° Grey, Black T0-2-15679/E 1 pc(s)

DATASHEET - T0-2-15679/E

On-Oﬀ switch, 3 pole + 1 N/O, 20 A, 90 °, ﬂush mounting

Part no. T0-2-15679/E

Catalog No. 029387



EL-Nummer

(Norway)

0001417026

Similar to illustration

Delivery program

Product range   On-Oﬀ switch

Part group reference   T0

   with black thumb grip and front plate

Number of poles   3 pole

Auxiliary contacts

  

  N/O 1

  N/C 0

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 90

Switching performance   maintained

Design number   15679

Front plate no.  

front plate   0-1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

06/16/2021 Eaton 029387 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T0-2-15679/E On-Oﬀ switch, 3 pole + 1 N/O, 20 A, 90 °, ﬂush mounting Part no. Catalog No.
PAGE 2
Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +50 Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Mechanical variables Number of poles 3 pole Auxiliary contacts N/O 1 N/C 0 Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 20 Note on rated uninterrupted current !u Rated
PAGE 3
400 V star-delta Ie A 20 500 V Ie A 9 500 V star-delta Ie A 15.6 690 V Ie A 4.9 690 V star-delta Ie A 8.5 P kW 230 V P kW 3 400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Rated uninterrupted current max. Main conducting paths General use A 16 A 10 Auxiliary contacts General Use IU Pilot Duty A 600 P 300 Switching capacity Maximum motor rating Single-phase 120 V AC HP 0.5 200 V AC HP 1 240 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 7.5 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 50 High fault rating kA 10 max.
PAGE 5
10.9.3 Impulse withstand voltage Is the panel builder's responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. The speciﬁcations for the switchgear must be observed. 10.
PAGE 6
North America Certiﬁcation UL listed, CSA certiﬁed Suitable for Branch circuits, suitable as motor disconnect Degree of Protection IEC: IP65; UL/CSA Type 1, 12 Dimensions ② ZFS-... Label mount not included as standard 06/16/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 029387 ED2021 V80.