Data Sheet

DOL starter wiring set
Mechanical connection element and electrical electric contact module PKZM0-XDM12
Notes
BK25/3-PKZ0-E extension terminal and if necessary B3.../...-PKZ0 three-phase commoning link can be added to motor-starter combinations to make Type F starters in accordance with UL508.
Notes
The DOL starters (complete units) consist of a PKZM0 motor protective circuit breaker and a DILM contactor.
With the adapter-less top-hat rail mounting of starters up to 15A, only the motor protective circuit breaker on the top-hat rail requires an adapter. The contactors are provided with mechanical
support via a mechanical connection element.
Control wire guide with max. 6 conductors up to 2.5 mm external diameter or 4 conductors up to 3.5 mm external diameter.
The connection of the main circuit between PKZ and contactor is established with electrical contact modules.
When using the auxiliary contacts DILA‐XHIT… (￫101042) the plug-in electrical connector can be removed without the removal of the front mounting auxiliary contact.
Technical data
General
Standards   IEC/EN 60947-4-1, VDE 0660
Mounting position  
Altitude  m Max. 2000
Ambient temperature   -25 - +55
Main conducting paths
Rated impulse withstand voltage U
imp
V AC 6000
Overvoltage category/pollution degree   III/3
Rated operational voltage U
e
V 230 - 415
Rated operational current   
Open, 3-pole: 50 –60 Hz   
380 V 400 V I
e
A 1.6
Additional technical data
Motor protective circuit breaker PKZM0, PKE   PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/
PKZM0 product group
DILM contactors, see contactor product group
DILET timing relay, ETR, see contactors, electronic timing relays product group
DILM contactors   
Current heat loss   
Current heat loss at I
e
to AC-3/400 V  W 5.7
Power consumption
DC operated Sealing W 2.6
Rating data for approved types
Auxiliary contacts   
Pilot Duty   
AC operated   A600
DC operated   P300
General Use   
AC  V 600
AC  A 15
DC  V 250
DC  A 1
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 1.6
Heat dissipation per pole, current-dependent P
vid
W 1.9
Equipment heat dissipation, current-dependent P
vid
W 5.7
06/18/2021 Eaton 283159 ED2021 V80.0 EN 2 / 5