Data Sheet

ManualsBrandsEaton ManualsAutomationDILM65(230V50/60HZ) Electrical contactor 3 makers 30 kW 1 pc(s)

DATASHEET - DILM65(230V50/60HZ)

Contactor, 3 pole, 380 V 400 V 30 kW, 230 V 50/60 Hz, AC operation, Screw

terminals

Part no. DILM65(230V50/60HZ)

Catalog No. 277902

Alternate Catalog

No.

XTCE065D00G2



Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Connection technique   Screw terminals

Number of poles   3 pole

Rated operational current

  

AC-3   

Notes   At maximum permissible ambient temperature (open.)

Also tested according to AC-3e.

380 V 400 V I

A 65

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 98

enclosed I

A 72

Conventional free air thermal current, 1 pole   

open I

A 200

enclosed I

A 180

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 20

380 V 400 V P kW 30

660 V 690 V P kW 35

AC-4   

220 V 230 V P kW 7

380 V 400 V P kW 12

660 V 690 V P kW 17

Contact sequence  

Instructions   Contacts to EN 50 012.

Can be combined with auxiliary contact   DILM150-XHI(V)…

DILM1000-XHI(V)…

Actuating voltage   230 V 50/60 Hz

Voltage AC/DC   AC operation

Connection to SmartWire-DT   no

Frame size   3

06/18/2021 Eaton 277902 ED2021 V80.0 EN 1 / 13

Summary of content (13 pages)

PAGE 1
DATASHEET - DILM65(230V50/60HZ) Contactor, 3 pole, 380 V 400 V 30 kW, 230 V 50/60 Hz, AC operation, Screw terminals Part no. Catalog No. Alternate Catalog No.
PAGE 2
Technical data General Standards IEC/EN 60947, VDE 0660, UL, CSA Lifespan, mechanical AC operated Operations x 10 6 10 Operating frequency, mechanical AC operated Operations/h 5000 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +60 Enclosed °C - 25 - 40 Storage °C - 40 - 80 g 10 N/O contact g 7 N/C contact g 5 g 10 N/O contact g 7 N/C contact g 5 Mounting position Mechanical shock resistanc
PAGE 3
Solid mm 2 1 x (0.75 - 4) 2 x (0.75 - 2.5) Flexible with ferrule mm 2 1 x (0.75 - 2.5) 2 x (0.75 - 2.5) Solid or stranded AWG 18 - 14 Stripping length mm 10 Terminal screw M3.5 Tightening torque Nm 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 0.8 x 5.
PAGE 4
15 V Ie A 65 440V Ie A 65 500 V Ie A 65 660 V 690 V Ie A 37 Motor rating P kWh 220 V 230 V P kW 20 240V P kW 22 380 V 400 V P kW 30 415 V P kW 39 440 V P kW 41 500 V P kW 47 660 V 690 V P kW 35 220 V 230 V Ie A 25 240 V Ie A 25 380 V 400 V Ie A 25 415 V Ie A 25 440 V Ie A 25 500 V Ie A 25 660 V 690 V Ie A 20 AC-4 Open, 3-pole: 50 – 60 Hz Motor rating P kWh 220 V 230 V P kW 7 240 V P kW 7.
PAGE 5
Arcing time Lifespan, mechanical; Coil 50/60 Hz ms x 10 10 6 Electromagnetic compatibility (EMC) Mechanical lifespan at 50 Hz approx.
PAGE 6
00V 60Hz 3phase HP 40 600V 60Hz 3phase A 41 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 65 Heat dissipation per pole, current-dependent Pvid W 5.7 Equipment heat dissipation, current-dependent Pvid W 17.1 Static heat dissipation, non-current-dependent Pvs W 4.1 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max.
PAGE 7
Number of auxiliary contacts as normally closed contact 0 Type of electrical connection of main circuit Screw connection Number of normally closed contacts as main contact 0 Number of main contacts as normally open contact 3 Approvals Product Standards IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking UL File No. E29096 UL Category Control No. NLDX CSA File No. 012528 CSA Class No.
PAGE 8
3: Auxiliary contact modules on the side: 2 x DILM1000-XHI(V)11-SI; surface mounting: 1 x DILM150-XHIA11 on the side: 2 x DILM1000-XHI(V)11-SA; surface mounting: 1 x DILM150-XHI (2 pole) on the side: 1 x DILM1000-XHI(V)11-SI; surface mounting: 1 x DILM150-XHIA22 on the side: 1 x DILM1000-XHI(V)11-SA; surface mounting: 1 x DILM150-XHI (4 pole) 06/18/2021 Eaton 277902 ED2021 V80.
PAGE 9
Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines 06/18/2021 Eaton 277902 ED2021 V80.
PAGE 10
Extreme switching duty Squirrel-cage motor Operating characteristics Inching, plugging, reversing Electrical characteristics Make: up to 6 x rated motor current Break: up to 6 x rated motor current Utilization category 100 % AC-4 Typical applications Printing presses Wire-drawing machines Centrifuges Special drives for manufacturing and processing machines 06/18/2021 Eaton 277902 ED2021 V80.
PAGE 11
Switching conditions for non-motor consumers, 3 pole, 4 pole Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 277902 ED2021 V80.
PAGE 12
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 277902 ED2021 V80.
PAGE 13
Lateral clearance to earthed parts: 6 mm DILM40…DILM72 DILMC40…DILMC65 DILMF40…DILMF65 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 277902 ED2021 V80.