Data Sheet

ManualsBrandsEaton ManualsAutomationDILM40-22(230V50HZ,240V60HZ) Electrical contactor 3 makers 18.5 kW 1 pc(s)

DATASHEET - DILM40-22(230V50HZ,240V60HZ)

Contactor, 380 V 400 V 18.5 kW, 2 N/O, 2 NC, 230 V 50 Hz, 240 V 60 Hz, AC

operation, Screw terminals

Part no. DILM40-22(230V50HZ,240V60HZ)

Catalog No. 277798

Alternate Catalog

No.

XTCE040D22GF

EL-Nummer

(Norway)

4110336

Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Complete devices up to 170 A

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

Connection technique   Screw terminals

  

Notes   Also suitable for motors with eﬃciency class IE3.

Also tested according to AC-3e.

Rated operational current

  

AC-3   

380 V 400 V I

A 40

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 60

enclosed I

A 45

Conventional free air thermal current, 1 pole   

open I

A 125

enclosed I

A 112

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 12.5

380 V 400 V P kW 18.5

660 V 690 V P kW 23

AC-4   

220 V 230 V P kW 5

380 V 400 V P kW 9

660 V 690 V P kW 12

Contacts

  

N/O = Normally open   2 N/O

N/C = Normally closed   2 NC

Instructions   Contacts to EN 50 012.

with mirror contact.

Contact sequence  

Actuating voltage   230 V 50 Hz, 240 V 60 Hz

Voltage AC/DC   AC operation

Technical data

General

Standards   IEC/EN 60947, VDE 0660, UL, CSA

06/18/2021 Eaton 277798 ED2021 V80.0 EN 1 / 13

Summary of content (13 pages)

PAGE 1
DATASHEET - DILM40-22(230V50HZ,240V60HZ) Contactor, 380 V 400 V 18.5 kW, 2 N/O, 2 NC, 230 V 50 Hz, 240 V 60 Hz, AC operation, Screw terminals Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Lifespan, mechanical AC operated Operations x 10 6 10 Operating frequency, mechanical AC operated Operations/h 5000 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +60 Enclosed °C - 25 - 40 Storage °C - 40 - 80 g 10 N/O contact g 7 N/C contact g 5 g 10 N/O contact g 7 N/C contact g 5 Mounting position Mechanical shock resistance (IEC/EN 60068-2-27) Half-sinusoidal shock, 10 ms Main contacts N/O
PAGE 3
Solid or stranded AWG 18 - 14 Stripping length mm 10 Terminal screw M3.5 Tightening torque Nm 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 0.8 x 5.
PAGE 4
660 V 690 V Ie A P kWh 220 V 230 V P kW 12.5 240V P kW 13.5 380 V 400 V P kW 18.5 415 V P kW 24 440 V P kW 25 500 V P kW 28 660 V 690 V P kW 23 220 V 230 V Ie A 18 240 V Ie A 18 380 V 400 V Ie A 18 415 V Ie A 18 440 V Ie A 18 500 V Ie A 18 660 V 690 V Ie A 14 P kWh 220 V 230 V P kW 5 240 V P kW 5.5 380 V 400 V P kW 9 415 V P kW 9.
PAGE 5
Arcing time Lifespan, mechanical; Coil 50/60 Hz ms x 10 10 6 Electromagnetic compatibility (EMC) Mechanical lifespan at 50 Hz approx. 30% lower than under “Technical data, general” Emitted interference to EN 60947-1 Interference immunity to EN 60947-1 Rating data for approved types Switching capacity Maximum motor rating Three-phase 200 V 208 V HP 10 230 V 240 V HP 15 460 V 480 V HP 30 575 V 600 V HP 40 115 V 120 V HP 3 230 V 240 V HP 7.
PAGE 6
200V 60Hz 3phase HP 7.5 200V 60Hz 3phase A 25.3 240V 60Hz 3phase HP 10 240V 60Hz 3phase A 28 480V 60Hz 3phase HP 25 480V 60Hz 3phase A 34 600V 60Hz 3phase HP 30 600V 60Hz 3phase A 32 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 40 Heat dissipation per pole, current-dependent Pvid W 2.2 Equipment heat dissipation, current-dependent Pvid W 6.
PAGE 7
Rated operation power at AC-3, 400 V kW 18.
PAGE 8
Characteristics 1: Overload relay 2: Suppressor 06/18/2021 Eaton 277798 ED2021 V80.
PAGE 9
on the side: 2 x DILM1000-XHI(V)11-SI; surface mounting: 1 x DILM150-XHIA11 on the side: 2 x DILM1000-XHI(V)11-SA; surface mounting: 1 x DILM150-XHI (2 pole) on the side: 1 x DILM1000-XHI(V)11-SI; surface mounting: 1 x DILM150-XHIA22 on the side: 1 x DILM1000-XHI(V)11-SA; surface mounting: 1 x DILM150-XHI (4 pole) 06/18/2021 Eaton 277798 ED2021 V80.
PAGE 10
Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines Extreme switching duty Squirrel-cage motor Operating cha
PAGE 11
Switching conditions for 3 pole, non-motor loads Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 277798 ED2021 V80.
PAGE 12
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 277798 ED2021 V80.
PAGE 13
Lateral clearance to earthed parts: 6 mm DILM40…DILM72 DILMC40…DILMC65 DILMF40…DILMF65 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 277798 ED2021 V80.