Data Sheet

ManualsBrandsEaton ManualsAutomationDILM40(RDC24) Electrical contactor 3 makers 18.5 kW 1 pc(s)

DATASHEET - DILM40(RDC24)

Contactor, 3 pole, 380 V 400 V 18.5 kW, RDC 24: 24 - 27 V DC, DC operation,

Screw terminals

Part no. DILM40(RDC24)

Catalog No. 277780

Alternate Catalog

No.

XTCE040D00TD

EL-Nummer

(Norway)

4130441

Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Connection technique   Screw terminals

Number of poles   3 pole

Rated operational current

  

AC-3   

Notes   At maximum permissible ambient temperature (open.)

Also tested according to AC-3e.

380 V 400 V I

A 40

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 60

enclosed I

A 45

Conventional free air thermal current, 1 pole   

open I

A 125

enclosed I

A 112

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 12.5

380 V 400 V P kW 18.5

660 V 690 V P kW 23

AC-4   

220 V 230 V P kW 5

380 V 400 V P kW 9

660 V 690 V P kW 12

Contact sequence  

Instructions   Contacts to EN 50 012.

integrated suppressor circuit in actuating electronics

Can be combined with auxiliary contact   DILM150-XHI(V)…

DILM1000-XHI(V)…

Actuating voltage   RDC 24: 24 - 27 V DC

Voltage AC/DC   DC operation

Connection to SmartWire-DT   no

Frame size   3

06/18/2021 Eaton 277780 ED2021 V80.0 EN 1 / 12

Summary of content (12 pages)

PAGE 1
DATASHEET - DILM40(RDC24) Contactor, 3 pole, 380 V 400 V 18.5 kW, RDC 24: 24 - 27 V DC, DC operation, Screw terminals Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Technical data General Standards IEC/EN 60947, VDE 0660, UL, CSA Lifespan, mechanical DC operated Operations x 10 6 10 Operating frequency, mechanical DC operated Operations/h 5000 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +60 Enclosed °C - 25 - 40 Storage °C - 40 - 80 g 10 N/O contact g 7 N/C contact g 5 g 10 N/O contact g 7 N/C contact g 5 Mounting position Mechanical shock resistanc
PAGE 3
Solid mm 2 1 x (0.75 - 4) 2 x (0.75 - 2.5) Flexible with ferrule mm 2 1 x (0.75 - 2.5) 2 x (0.75 - 2.5) Solid or stranded AWG 18 - 14 Stripping length mm 10 Terminal screw M3.5 Tightening torque Nm 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 0.8 x 5.
PAGE 4
15 V Ie A 40 440V Ie A 40 500 V Ie A 40 660 V 690 V Ie A 25 Motor rating P kWh 220 V 230 V P kW 12.5 240V P kW 13.5 380 V 400 V P kW 18.5 415 V P kW 24 440 V P kW 25 500 V P kW 28 660 V 690 V P kW 23 220 V 230 V Ie A 18 240 V Ie A 18 380 V 400 V Ie A 18 415 V Ie A 18 440 V Ie A 18 500 V Ie A 18 660 V 690 V Ie A 14 AC-4 Open, 3-pole: 50 – 60 Hz Motor rating P kWh 220 V 230 V P kW 5 240 V P kW 5.
PAGE 5
Opening delay Opening delay Arcing time Electromagnetic compatibility (EMC) ms ms 24 ms 10 Emitted interference to EN 60947-1 Interference immunity to EN 60947-1 Rating data for approved types Switching capacity Maximum motor rating Three-phase 200 V 208 V HP 10 230 V 240 V HP 15 460 V 480 V HP 30 575 V 600 V HP 40 115 V 120 V HP 3 230 V 240 V HP 7.5 A 63 Single-phase General use Short Circuit Current Rating SCCR Basic Rating SCCR kA 10 max. Fuse A 250 max.
PAGE 6
Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 40 Heat dissipation per pole, current-dependent Pvid W 2.2 Equipment heat dissipation, current-dependent Pvid W 6.6 Static heat dissipation, non-current-dependent Pvs W 1 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 60 IEC/EN 61439 design veriﬁcation 10.
PAGE 7
Number of main contacts as normally open contact Approvals 3 Product Standards IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking UL File No. E29096 UL Category Control No. NLDX CSA File No. 012528 CSA Class No. 2411-03, 3211-04 North America Certiﬁcation UL listed, CSA certiﬁed Specially designed for North America No Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules 06/18/2021 Eaton 277780 ED2021 V80.
PAGE 8
on the side: 2 x DILM1000-XHI(V)11-SI; surface mounting: 1 x DILM150-XHIA11 on the side: 2 x DILM1000-XHI(V)11-SA; surface mounting: 1 x DILM150-XHI (2 pole) on the side: 1 x DILM1000-XHI(V)11-SI; surface mounting: 1 x DILM150-XHIA22 on the side: 1 x DILM1000-XHI(V)11-SA; surface mounting: 1 x DILM150-XHI (4 pole) 06/18/2021 Eaton 277780 ED2021 V80.
PAGE 9
Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines Extreme switching duty Squirrel-cage motor Operating cha
PAGE 10
Switching conditions for non-motor consumers, 3 pole, 4 pole Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 277780 ED2021 V80.
PAGE 11
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 277780 ED2021 V80.
PAGE 12
Lateral clearance to earthed parts: 6 mm DILM40…DILM72 DILMC40…DILMC65 DILMF40…DILMF65 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 277780 ED2021 V80.