Data Sheet

ManualsBrandsEaton ManualsAutomationDILMC12-10(24VDC) Electrical contactor 3 makers 5.5 kW 1 pc(s)

DATASHEET - DILMC12-10(24VDC)

Contactor, 3 pole, 380 V 400 V 5.5 kW, 1 N/O, 24 V DC, DC operation,

Spring-loaded terminals

Part no. DILMC12-10(24VDC)

Catalog No. 277532

Alternate Catalog

No.

XTCEC012B10TD

EL-Nummer

(Norway)

4110311

Similar to illustration

Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Connection technique   Spring-loaded terminals

Number of poles   3 pole

Rated operational current

  

AC-3   

Notes   At maximum permissible ambient temperature (open.)

Also tested according to AC-3e.

380 V 400 V I

A 12

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 22

enclosed I

A 18

Conventional free air thermal current, 1 pole   

open I

A 50

enclosed I

A 45

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 3.5

380 V 400 V P kW 5.5

660 V 690 V P kW 6.5

AC-4   

220 V 230 V P kW 2

380 V 400 V P kW 3

660 V 690 V P kW 4.4

Contacts

  

N/O = Normally open   1 N/O

Contact sequence  

Instructions   Contacts to EN 50 012.

Auxiliary current, coil, and main current terminals with spring-cage connection

technology.

Integrated varistor suppressor circuit.

Can be combined with auxiliary contact   DILM32-XHIC…

DILA-XHIC(V)…

06/18/2021 Eaton 277532 ED2021 V80.0 EN 1 / 13

Summary of content (13 pages)

PAGE 1
DATASHEET - DILMC12-10(24VDC) Contactor, 3 pole, 380 V 400 V 5.5 kW, 1 N/O, 24 V DC, DC operation, Spring-loaded terminals Similar to illustration Part no. Catalog No. Alternate Catalog No.
PAGE 2
Actuating voltage 24 V DC Voltage AC/DC DC operation Connection to SmartWire-DT yes in conjunction with DIL-SWD SmartWire DT contactor module Frame size 1 Technical data General Standards IEC/EN 60947, VDE 0660, UL, CSA Lifespan, mechanical DC operated Operations x 10 6 10 Operating frequency, mechanical DC operated Operations/h 9000 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +60 Enclosed °C - 25 -
PAGE 3
2 x (0.75 - 2.5) Flexible with ferrule mm 1 x (0.75 - 1.5) 2 x (0.75 - 1.5) Solid or stranded AWG 18 - 14 Stripping length mm 10 mm 3.
PAGE 4
500 V Ie A 10 660 V 690 V Ie A 7 P kWh 220 V 230 V P kW 3.5 240V P kW 4 380 V 400 V P kW 5.5 415 V P kW 7 440 V P kW 7.5 500 V P kW 7 660 V 690 V P kW 6.5 220 V 230 V Ie A 7 240 V Ie A 7 380 V 400 V Ie A 7 415 V Ie A 7 440 V Ie A 7 500 V Ie A 6 660 V 690 V Ie A 5 P kWh 220 V 230 V P kW 2 240 V P kW 2.2 380 V 400 V P kW 3 415 V P kW 3.4 440 V P kW 3.6 500 V P kW 3.5 660 V 690 V P kW 4.
PAGE 5
Arcing time Electromagnetic compatibility (EMC) ms 10 Emitted interference according to EN 60947-1 Interference immunity according to EN 60947-1 Rating data for approved types Switching capacity Maximum motor rating Three-phase 200 V 208 V HP 3 230 V 240 V HP 3 460 V 480 V HP 10 575 V 600 V HP 10 115 V 120 V HP 1 230 V 240 V HP 2 A 20 Single-phase General use Auxiliary contacts Pilot Duty AC operated A600 DC operated P300 General Use AC V 600 AC A 10 DC V 250 DC A
PAGE 6
LRA 480V 60Hz 3phase A 72 FLA 480V 60Hz 3phase A 12 200V 60Hz 3phase HP 2 200V 60Hz 3phase A 7.8 240V 60Hz 3phase HP 2 240V 60Hz 3phase A 6.8 480V 60Hz 3phase HP 7.5 480V 60Hz 3phase A 11 600V 60Hz 3phase HP 7.5 600V 60Hz 3phase A 9 Elevator Control Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 12 Heat dissipation per pole, current-dependent Pvid W 0.
PAGE 7
Voltage type for actuating DC Rated operation current Ie at AC-1, 400 V A 22 Rated operation current Ie at AC-3, 400 V A 12 Rated operation power at AC-3, 400 V kW 5.5 Rated operation current Ie at AC-4, 400 V A 7 Rated operation power at AC-4, 400 V kW 3 Rated operation power NEMA kW 7.
PAGE 8
Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules 06/18/2021 Eaton 277532 ED2021 V80.
PAGE 9
Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines 06/18/2021 Eaton 277532 ED2021 V80.
PAGE 10
Extreme switching duty Squirrel-cage motor Operating characteristics Inching, plugging, reversing Electrical characteristics Make: up to 6 x rated motor current Break: up to 6 x rated motor current Utilization category 100 % AC-4 Typical applications Printing presses Wire-drawing machines Centrifuges Special drives for manufacturing and processing machines 06/18/2021 Eaton 277532 ED2021 V80.
PAGE 11
Switching conditions for non-motor consumers, 3 pole, 4 pole Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 277532 ED2021 V80.
PAGE 12
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 277532 ED2021 V80.