Data Sheet

ManualsBrandsEaton ManualsAutomationDILM25-01(RDC24) Electrical contactor 3 makers 11 kW 1 pc(s)

DATASHEET - DILM25-01(RDC24)

Contactor, 3 pole, 380 V 400 V 11 kW, 1 NC, RDC 24: 24 - 27 V DC, DC

operation, Screw terminals

Part no. DILM25-01(RDC24)

Catalog No. 277178

Alternate Catalog

No.

XTCE025C01TD

EL-Nummer

(Norway)

4130348

Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Connection technique   Screw terminals

Number of poles   3 pole

Rated operational current

  

AC-3   

Notes   At maximum permissible ambient temperature (open.)

Also tested according to AC-3e.

380 V 400 V I

A 25

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 45

enclosed I

A 36

Conventional free air thermal current, 1 pole   

open I

A 100

enclosed I

A 90

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 7.5

380 V 400 V P kW 11

660 V 690 V P kW 14

AC-4   

220 V 230 V P kW 3.5

380 V 400 V P kW 6

660 V 690 V P kW 8.5

Contacts

  

N/C = Normally closed   1 NC

Contact sequence  

Instructions   Contacts to EN 50 012.

integrated suppressor circuit in actuating electronics

with mirror contact.

Can be combined with auxiliary contact   DILA-XHI(V)…

DILM32-XHI11-S

Actuating voltage   RDC 24: 24 - 27 V DC

Voltage AC/DC   DC operation

06/18/2021 Eaton 277178 ED2021 V80.0 EN 1 / 13

Summary of content (13 pages)

PAGE 1
DATASHEET - DILM25-01(RDC24) Contactor, 3 pole, 380 V 400 V 11 kW, 1 NC, RDC 24: 24 - 27 V DC, DC operation, Screw terminals Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Connection to SmartWire-DT yes in conjunction with DIL-SWD SmartWire DT contactor module Frame size 2 Technical data General Standards IEC/EN 60947, VDE 0660, UL, CSA Lifespan, mechanical DC operated Operations x 10 6 10 Operating frequency, mechanical DC operated Operations/h 5000 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +60 Enclosed °C - 25 - 40 Storage °C - 40 - 80 g 10 N/O contact g 7 N/C
PAGE 3
Terminal capacity control circuit cables Solid mm 2 1 x (0.75 - 4) 2 x (0.75 - 2.5) Flexible with ferrule mm 2 1 x (0.75 - 2.5) 2 x (0.75 - 2.5) Solid or stranded AWG 18 - 14 Stripping length mm 10 Terminal screw M3.5 Tightening torque Nm 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 0.8 x 5.
PAGE 4
380 V 400 V Ie A 25 415 V Ie A 25 440V Ie A 25 500 V Ie A 25 660 V 690 V Ie A 15 Motor rating P kWh 220 V 230 V P kW 7.5 240V P kW 8.5 380 V 400 V P kW 11 415 V P kW 14.5 440 V P kW 15.5 500 V P kW 17.5 660 V 690 V P kW 14 220 V 230 V Ie A 13 240 V Ie A 13 380 V 400 V Ie A 13 415 V Ie A 13 440 V Ie A 13 500 V Ie A 13 660 V 690 V Ie A 10 AC-4 Open, 3-pole: 50 – 60 Hz Motor rating P kWh 220 V 230 V P kW 3.
PAGE 5
Closing delay Opening delay Opening delay Arcing time Electromagnetic compatibility (EMC) ms 47 ms ms 30 ms 10 Emitted interference according to EN 60947-1 Interference immunity according to EN 60947-1 Rating data for approved types Switching capacity Maximum motor rating Three-phase 200 V 208 V HP 7.
PAGE 6
00V 60Hz 3phase, 347V 60Hz 1phase A 40 LRA 480V 60Hz 3phase A 240 FLA 480V 60Hz 3phase A 40 LRA 600V 60Hz 3phase A 180 FLA 600V 60Hz 3phase A 30 LRA 480V 60Hz 3phase A 150 FLA 480V 60Hz 3phase A 25 200V 60Hz 3phase HP 3 200V 60Hz 3phase A 11 240V 60Hz 3phase HP 5 240V 60Hz 3phase A 15.2 480V 60Hz 3phase HP 10 480V 60Hz 3phase A 14 600V 60Hz 3phase HP 15 600V 60Hz 3phase A 17 Refrigeration Control (CSA only) Deﬁnite Purpose Ratings (100,000 cycles acc.
PAGE 7
Technical data ETIM 7.0 Low-voltage industrial components (EG000017) / Power contactor, AC switching (EC000066) Electric engineering, automation, process control engineering / Low-voltage switch technology / Contactor (LV) / Power contactor, AC switching (ecl@ss10.0.
PAGE 8
Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules 06/18/2021 Eaton 277178 ED2021 V80.
PAGE 9
Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines 06/18/2021 Eaton 277178 ED2021 V80.
PAGE 10
Extreme switching duty Squirrel-cage motor Operating characteristics Inching, plugging, reversing Electrical characteristics Make: up to 6 x rated motor current Break: up to 6 x rated motor current Utilization category 100 % AC-4 Typical applications Printing presses Wire-drawing machines Centrifuges Special drives for manufacturing and processing machines 06/18/2021 Eaton 277178 ED2021 V80.
PAGE 11
Switching conditions for non-motor consumers, 3 pole, 4 pole Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 277178 ED2021 V80.
PAGE 12
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 277178 ED2021 V80.
PAGE 13
distance at side to earthed parts: 6 mm 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 277178 ED2021 V80.