Data Sheet

3 220 V A 5
DC L/R ≦ 50 ms   
Contacts in series:  A 
3 24 V A 4
3 60 V A 4
3 110 V A 2
3 220 V A 1
Control circuit reliability Failure rate λ
<10
-8
, < one failure at 100 million operations
(at U
e
= 24 V DC, U
min
= 17 V, I
min
= 5.4 mA)
Short-circuit rating without welding   
Maximum overcurrent protective device   
220 V 230 V 240 V  PKZM0 4
380 V 400 V 415 V  PKZM0 4
Short-circuit protection maximum fuse   
500 V  A gG/gL 10
Current heat loss at I
th
  
DC operated  W 0.85
Magnet systems
Voltage tolerance   
DC operated   
Notes   Smoothed DC, three-phase bridge rectifiers or smoothed double-wave rectification
Pick-up voltage   0.8 - 1.1
at 24 V: without auxiliary contact component (40 °C) Pick-up x U
c
0.7 - 1.3
Power consumption   
DC operation   
DC operated Pull-in =
sealing
W 3
duty factor  % DF 100
Changeover time at 100 % U
S
(recommended value)   
DC operated closing delay  ms 
Switching times, DC operated, max. closing delay  ms 31
DC operated N/O contact opening delay  ms 
Switching times, DC actuated make contact Opening delay, max.  ms 12
Rating data for approved types
Auxiliary contacts   
Pilot Duty   
AC operated   A600
DC operated   P300
General Use   
AC  V 600
AC  A 15
DC  V 250
DC  A 1
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 15.5
Heat dissipation per pole, current-dependent P
vid
W 1
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 3
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 60
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
06/16/2021 Eaton 276414 ED2021 V80.0 EN 3 / 8