Data Sheet

DATASHEET - TR-G3/18
Transformator 230V, 4/8/12V, 2/2/1, 5A, 2HP
Part no. TR-G3/18
Catalog No. 272483

EL-Nummer
(Norway)
6253167
Similar to illustration
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 7.02
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 40
   0
Technical data ETIM 7.0
Devices for distribution board-/surface mounting (EG000062) / Bell transformer (EC001547)
Electric engineering, automation, process control engineering / Transformer, converter, coil / Bell transformer / Bell transformer (unspecified) (ecl@ss10.0.1-27-03-11-90 [BAC147011])
Primary voltage  V 230
Secondary voltage 1  V 4
Secondary voltage 2  V 8
Secondary voltage 3  V 12
Secondary amperage 1  A 2
Secondary amperage 2  A 2
Secondary amperage 3  A 1.5
Max. output power  W 0
Max. output current  A 0
Max. power loss  W 0
Type of transformer   Standard bell ringing transformer
Suitable for surface mounting   Yes
Suitable for flush-mounting   No
Modular version   Yes
Length  mm 55
Width  mm 36
Height  mm 90
Width in number of modular spacings   2
Short-circuit protected   Yes
Temperature protection   Yes
With on/off switch   No
06/16/2021 Eaton Industries GmbH
http://www.eaton.eu
© 06/2021 by Eaton Industries GmbH
Eaton 272483 ED2021 V80.0 EN
1 / 1