Manualshelf

Data Sheet

ManualsBrandsEaton ManualsConnectorsEaton 266706 Auxiliary terminal 1 pc(s)
12
DATASHEET - NZM2-XSVR
Control circuit plug unit for remote operator
Part no. NZM2-XSVR
Catalog No. 266706
EL-Nummer
(Norway)
0004359025
Delivery program
Product range Accessories
Accessories Auxiliary conductor plug device for plug technology
Standard/Approval IEC
Installation type Plug-in units
Construction size NZM2(-4), N2-(4)
Description Auxiliary conductor plug connector for use with basic units NZM...-SVE and plug-in
socket NZM...-XSVS to disconnect the cables of the remote actuator
Number of poles 3/4 pole
Standard equipment Screw connection
Technical data
General
Standards IEC/EN 60947
Protection against direct contact Finger and back-of-hand proof to VDE 0106 part 100
Climatic proofing Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
Ambient temperature, storage °C - 40 - + 70
Operation °C -25 - +70
Mechanical shock resistance (10 ms half-sinusoidal shock) according to IEC
60068-2-27
g 20 (half-sinusoidal shock 20 ms)
Safe isolation to EN 61140
between the auxiliary contacts V AC 300
Mounting position As required
Direction of incoming supply as required
Design verification as per IEC/EN 61439
Technical data for design verification
Operating ambient temperature min. °C -25
Operating ambient temperature max. °C 70
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements.
10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard's requirements.
01/09/2020 Eaton 266706 ED2019 V63.0 EN 1 / 2

Summary of content (2 pages)