Datasheet
2 x (6 - 16)
Stranded
mm
2
1 x (10 - 70)
3)
2 x (6-25)
3)
Up to 95 mm² can be connected depending on the cable manufacturer.
Tunnel terminal
Solid
mm
2
1 x 16
Stranded
1-hole
mm
2
1 x (25 - 95)
Bolt terminal and rear-side connection
Direct on the switch
Solid
mm
2
1 x (10 - 16)
2 x (6 - 16)
Stranded
mm
2
1 x (10 - 70)
3)
2 x 25
3)
Up to 95 mm² can be connected depending on the cable manufacturer.
Al circular conductor
Tunnel terminal
Solid
mm
2
1 x 16
Stranded
Stranded
mm
2
1 x (25 - 95)
Bolt terminal and rear-side connection
Direct on the switch
Solid
mm
2
1 x (10 - 16)
2 x (10 - 16)
Stranded
mm
2
1 x (25 - 35)
2 x (25 - 35)
Cu strip (number of segments x width x segment thickness)
Box terminal
min. mm 2 x 9 x 0.8
max. mm 9 x 9 x 0.8
Copper busbar (width x thickness) mm
Bolt terminal and rear-side connection
Screw connection M6
Direct on the switch
min. mm 12 x 5
max. mm 16 x 5
Control cables
mm
2
1 x (0.75 - 2.5)
2 x (0.75 - 1.5)
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation I
n
A 50
Equipment heat dissipation, current-dependent P
vid
W 13.2
Operating ambient temperature min. °C -25
Operating ambient temperature max. °C 70
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements.
10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions Meets the product standard's requirements.
06/16/2021 Eaton 259076 ED2021 V80.0 EN 3 / 9