Data Sheet

DATASHEET - M22-DZ-X
Release pushbutton, without label
Part no. M22-DZ-X
Catalog No. 254835
Alternate Catalog
No.
M22-DZ-XQ

Delivery program
Accessories   General accessories
Product range   Accessories
Basic function accessories   Reset buttons
Accessories   Pushbuttons
Function   For enclosed overload relays
   For enclosed overload relays
Mounting diameter: 22.3 mm
Description   Mounting diameter: 22.3 mm
Button plate   Without button plate, add button plate.
Front ring   Bezel: titanium
Connection to SmartWire-DT   no
For use with   ZW7...
ZE
Z5
ZB12
ZB32
ZB65
ZB150
Technical data
General
Ambient temperature   
Open  °C -25 - +70
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 70
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
01/09/2020 Eaton 254835 ED2019 V63.0 EN 1 / 3