Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 20 A 1 x 90 ° Grey, Black T0-2-1/E 1 pc(s)

DATASHEET - T0-2-1/E

On-Oﬀ switch, T0, 20 A, ﬂush mounting, 2 contact unit(s), 3 pole, with

black thumb grip and front plate

Part no. T0-2-1/E

Catalog No. 024639



EL-Nummer

(Norway)

0001456244

Delivery program

Product range   On-Oﬀ switch

Part group reference   T0

   with black thumb grip and front plate

Number of poles   3 pole

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 90

Switching performance   maintained

Design number   1

Front plate no.  

front plate   0-1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

Enclosed  °C -25 - +40

Overvoltage category/pollution degree   III/3

Rated impulse withstand voltage U

imp

V AC 6000

06/18/2021 Eaton 024639 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T0-2-1/E On-Oﬀ switch, T0, 20 A, ﬂush mounting, 2 contact unit(s), 3 pole, with black thumb grip and front plate Delivery program Part no. Catalog No. T0-2-1/E 024639 EL-Nummer (Norway) 0001456244 Product range On-Oﬀ switch Part group reference T0 with black thumb grip and front plate Number of poles 3 pole Degree of Protection Front IP65 Design ﬂush mounting Contact sequence Switching angle ° 90 Switching performance maintained Design number 1 Front plate no.
PAGE 2
Mechanical shock resistance g 15 Mounting position As required Contacts Mechanical variables Number of poles 3 pole Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 20 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section. Load rating with intermittent operation, class 12 AB 25 % DF x Ie 2 AB 40 % DF x Ie 1.6 AB 60 % DF x Ie 1.
PAGE 3
400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Maximum motor rating Single-phase 120 V AC HP 0.5 200 V AC HP 1 240 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 7.5 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 50 High fault rating kA 10 max. Fuse A 20, Class J AWG 18 - 14 Terminal capacity Solid or ﬂexible conductor with ferrule Terminal screw M3.5 Tightening torque lb-in 8.
PAGE 5
10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaﬂet (IL) is observed. Technical data ETIM 7.0 Low-voltage industrial components (EG000017) / Switch disconnector (EC000216) Electric engineering, automation, process control engineering / Low-voltage switch technology / Oﬀ-load switch, circuit breaker, control switch / Switch disconnector (ecl@ss10.0.
PAGE 6
Dimensions ② ZFS-... Label mount not included as standard 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 024639 ED2021 V80.