Data Sheet

ManualsBrandsEaton ManualsAutomationDILM95(230V50/60HZ) Electrical contactor 3 makers 45 kW 1 pc(s)

DATASHEET - DILM95(230V50/60HZ)

Contactor, 3 pole, 380 V 400 V 45 kW, 230 V 50/60 Hz, AC operation, Screw

terminals

Part no. DILM95(230V50/60HZ)

Catalog No. 239488

Alternate Catalog

No.

XTCE095F00G2



Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Connection technique   Screw terminals

Number of poles   3 pole

Rated operational current

  

AC-3   

Notes   At maximum permissible ambient temperature (open.)

Also tested according to AC-3e.

380 V 400 V I

A 95

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 130

enclosed I

A 100

Conventional free air thermal current, 1 pole   

open I

A 275

enclosed I

A 250

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 30

380 V 400 V P kW 45

660 V 690 V P kW 75

AC-4   

220 V 230 V P kW 16

380 V 400 V P kW 26

660 V 690 V P kW 35

Contact sequence  

Instructions   Contacts to EN 50 012.

Can be combined with auxiliary contact   DILM150-XHI(V)…

DILM1000-XHI(V)…

Actuating voltage   230 V 50/60 Hz

Voltage AC/DC   AC operation

Connection to SmartWire-DT   no

Frame size   4

06/18/2021 Eaton 239488 ED2021 V80.0 EN 1 / 13

Summary of content (13 pages)

PAGE 1
DATASHEET - DILM95(230V50/60HZ) Contactor, 3 pole, 380 V 400 V 45 kW, 230 V 50/60 Hz, AC operation, Screw terminals Part no. Catalog No. Alternate Catalog No.
PAGE 2
Technical data General Standards IEC/EN 60947, VDE 0660, UL, CSA Lifespan, mechanical AC operated Operations x 10 6 5.
PAGE 3
Solid or stranded AWG 18 - 14 Stripping length mm 10 Terminal screw M3.5 Tightening torque Nm 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 0.8 x 5.
PAGE 4
660 V 690 V Ie A P kWh 220 V 230 V P kW 30 240V P kW 32 380 V 400 V P kW 45 415 V P kW 57 440 V P kW 60 500 V P kW 70 660 V 690 V P kW 75 220 V 230 V Ie A 50 240 V Ie A 50 380 V 400 V Ie A 50 415 V Ie A 50 440 V Ie A 50 500 V Ie A 50 660 V 690 V Ie A 37 P kWh 220 V 230 V P kW 16 240 V P kW 17 380 V 400 V P kW 26 415 V P kW 30 440 V P kW 32 500 V P kW 36 660 V 690 V P kW 35 60 V Ie A 110 110 V Ie A 110 220 V I
PAGE 5
Electromagnetic compatibility (EMC) Emitted interference to EN 60947-1 Interference immunity to EN 60947-1 Rating data for approved types Switching capacity Maximum motor rating Three-phase 200 V 208 V HP 30 230 V 240 V HP 40 460 V 480 V HP 75 575 V 600 V HP 100 115 V 120 V HP 7.5 230 V 240 V HP 15 A 125 Single-phase General use Short Circuit Current Rating SCCR Basic Rating SCCR kA 10 max. Fuse A 600 max. CB A 600 SCCR (fuse) kA 30/100 max.
PAGE 6
240V 60Hz 3phase A 80 480V 60Hz 3phase HP 60 480V 60Hz 3phase A 77 600V 60Hz 3phase HP 75 600V 60Hz 3phase A 77 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 95 Heat dissipation per pole, current-dependent Pvid W 4.2 Equipment heat dissipation, current-dependent Pvid W 12.6 Static heat dissipation, non-current-dependent Pvs W 5.
PAGE 7
Rated operation power NEMA kW 55 Modular version No Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as normally closed contact 0 Type of electrical connection of main circuit Screw connection Number of normally closed contacts as main contact 0 Number of main contacts as normally open contact 3 Approvals Product Standards IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking UL File No. E29096 UL Category Control No.
PAGE 8
Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules 06/18/2021 Eaton 239488 ED2021 V80.
PAGE 9
on the side: 2 x DILM820-XHI11(V)-SI; 2 x DILM820-XHI11-SA Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications 06/18/2021 Eaton 239488 ED2021 V80.
PAGE 10
Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines Extreme switching duty Squirrel-cage motor Operating characteristics Inching, plugging, reversing Electrical characteristics Make: up to 6 x rated motor current Break: up to 6 x rated motor current Utilization category 100 % AC-4 Typical applications Printing presses Wire-drawing machines Centrifuges Special drives f
PAGE 11
Switching conditions for non-motor consumers, 3 pole, 4 pole Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 239488 ED2021 V80.
PAGE 12
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 239488 ED2021 V80.
PAGE 13
distance at side to earthed parts: 10 mm DILM80…DILM170 DILMC80…DILMC150 DILMF80…DILMF150 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 239488 ED2021 V80.