Data Sheet

ManualsBrandsEaton ManualsAutomationDILM80(230V50HZ,240V60HZ) Electrical contactor 3 makers 37 kW 1 pc(s)

DATASHEET - DILM80(230V50HZ,240V60HZ)

Contactor, 3 pole, 380 V 400 V 37 kW, 230 V 50 Hz, 240 V 60 Hz, AC

operation, Screw terminals

Part no. DILM80(230V50HZ,240V60HZ)

Catalog No. 239402

Alternate Catalog

No.

XTCE080F00F

EL-Nummer

(Norway)

4134048

Delivery program

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Connection technique   Screw terminals

Number of poles   3 pole

Rated operational current

  

AC-3   

Notes   At maximum permissible ambient temperature (open.)

Also tested according to AC-3e.

380 V 400 V I

A 80

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 110

enclosed I

A 80

Conventional free air thermal current, 1 pole   

open I

A 225

enclosed I

A 200

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 25

380 V 400 V P kW 37

660 V 690 V P kW 63

AC-4   

220 V 230 V P kW 11.5

380 V 400 V P kW 20

660 V 690 V P kW 26

Contact sequence  

Instructions   Contacts to EN 50 012.

Can be combined with auxiliary contact   DILM150-XHI(V)…

DILM1000-XHI(V)…

Actuating voltage   230 V 50 Hz, 240 V 60 Hz

Voltage AC/DC   AC operation

Connection to SmartWire-DT   no

Frame size   4

06/18/2021 Eaton 239402 ED2021 V80.0 EN 1 / 13

Summary of content (13 pages)

PAGE 1
DATASHEET - DILM80(230V50HZ,240V60HZ) Contactor, 3 pole, 380 V 400 V 37 kW, 230 V 50 Hz, 240 V 60 Hz, AC operation, Screw terminals Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Technical data General Standards IEC/EN 60947, VDE 0660, UL, CSA Lifespan, mechanical AC operated Operations x 10 6 5.
PAGE 3
Solid or stranded AWG 18 - 14 Stripping length mm 10 Terminal screw M3.5 Tightening torque Nm 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 0.8 x 5.
PAGE 4
660 V 690 V Ie A P kWh 220 V 230 V P kW 25 240V P kW 27.5 380 V 400 V P kW 37 415 V P kW 48 440 V P kW 51 500 V P kW 58 660 V 690 V P kW 63 220 V 230 V Ie A 40 240 V Ie A 40 380 V 400 V Ie A 40 415 V Ie A 40 440 V Ie A 40 500 V Ie A 40 660 V 690 V Ie A 27 P kWh 220 V 230 V P kW 11.
PAGE 5
Permissible residual current with actuation of A1 - A2 by the electronics (with 0 signal). mA Electromagnetic compatibility (EMC) ≦1 Emitted interference to EN 60947-1 Interference immunity to EN 60947-1 Rating data for approved types Switching capacity Maximum motor rating Three-phase 200 V 208 V HP 25 230 V 240 V HP 30 460 V 480 V HP 60 575 V 600 V HP 75 115 V 120 V HP 7.
PAGE 6
240V 60Hz 3phase HP 25 240V 60Hz 3phase A 68 480V 60Hz 3phase HP 50 480V 60Hz 3phase A 65 600V 60Hz 3phase HP 60 600V 60Hz 3phase A 62 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 80 Heat dissipation per pole, current-dependent Pvid W 3 Equipment heat dissipation, current-dependent Pvid W 9 Static heat dissipation, non-current-dependent Pvs W 5.
PAGE 7
Rated operation power at AC-4, 400 V kW 20 Rated operation power NEMA kW 44.7 Modular version No Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as normally closed contact 0 Type of electrical connection of main circuit Screw connection Number of normally closed contacts as main contact 0 Number of main contacts as normally open contact 3 Approvals Product Standards IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking UL File No.
PAGE 8
Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules 06/18/2021 Eaton 239402 ED2021 V80.
PAGE 9
on the side: 2 x DILM820-XHI11(V)-SI; 2 x DILM820-XHI11-SA Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications 06/18/2021 Eaton 239402 ED2021 V80.
PAGE 10
Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines Extreme switching duty Squirrel-cage motor Operating characteristics Inching, plugging, reversing Electrical characteristics Make: up to 6 x rated motor current Break: up to 6 x rated motor current Utilization category 100 % AC-4 Typical applications Printing presses Wire-drawing machines Centrifuges Special drives f
PAGE 11
Switching conditions for non-motor consumers, 3 pole, 4 pole Operating characteristics Non inductive and slightly inductive loads Electrical characteristics Switch on: 1 x rated operational current Switch oﬀ: 1 x rated operational current Utilization category 100 % AC-1 Typical examples of application Electric heat 06/18/2021 Eaton 239402 ED2021 V80.
PAGE 12
Dimensions Contactor with auxiliary contact module 06/18/2021 Eaton 239402 ED2021 V80.
PAGE 13
distance at side to earthed parts: 10 mm DILM80…DILM170 DILMC80…DILMC150 DILMF80…DILMF150 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 239402 ED2021 V80.