Data Sheet

10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Foot-/palm switch complete (EC000231)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Foot, palm switch (ecl@ss10.0.1-27-37-12-17 [AKF035014])
Unlocking method   Pull-release
Colour cap   Red
Number of contacts as normally open contact   1
Number of contacts as normally closed contact   1
Switching function latching   Yes
Spring-return   No
Hole diameter  mm 0
Degree of protection (IP)   IP67/IP69K
Degree of protection (NEMA)   4X
Approvals
Product Standards   IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking
UL File No.   E29184
UL Category Control No.   NKCR
CSA File No.   012528
CSA Class No.   3211-03
North America Certification   UL listed, CSA certified
Degree of Protection   UL/CSA Type 3R, 4X, 12, 13
Dimensions
3 x M20 (PG 13.5) on the side
1 x M16 in the base
06/18/2021 Eaton Industries GmbH
http://www.eaton.eu
© 06/2021 by Eaton Industries GmbH
Eaton 229748 ED2021 V80.0 EN
3 / 3