Data Sheet

ManualsBrandsEaton ManualsCircuit BreakersEaton T3-2-95/I2 Uniselector 32 690 V 1 pc(s)

DATASHEET - T3-2-95/I2

step switch for heating, T3, 32 A, surface mounting, 2 contact unit(s),

Contacts: 4, 60 °, maintained, With 0 (Oﬀ) position, 0-3, Design number 95

Part no. T3-2-95/I2

Catalog No. 222855



EL-Nummer

(Norway)

0001456841

Similar to illustration

Delivery program

Product range   Control switches

Part group reference   T3

Basic function   step switch for heating

   with black thumb grip and front plate

Contacts   4

Degree of Protection   IP65

  

Design   surface mounting

  

Contact sequence  

Switching angle  ° 60

Switching performance   maintained

With 0 (Oﬀ) position

Design number   95

Front plate no.  

front plate   0-3

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 15

Rated uninterrupted current I

A 32

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

01/09/2020 Eaton 222855 ED2019 V63.0 EN 1 / 7

Summary of content (7 pages)

PAGE 1
DATASHEET - T3-2-95/I2 step switch for heating, T3, 32 A, surface mounting, 2 contact unit(s), Contacts: 4, 60 °, maintained, With 0 (Oﬀ) position, 0-3, Design number 95 Part no. Catalog No.
PAGE 2
Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 12 Mounting position As required Contacts Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 32 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section.
PAGE 3
AC-21A Rated operational current switch 440 V Ie A 32 AC-23A Motor rating AC-23A, 50 - 60 Hz P kW 230 V P kW 7.5 400 V 415 V P kW 15 500 V P kW 15 690 V P kW 15 230 V Ie A 32 400 V 415 V Ie A 32 500 V Ie A 26.
PAGE 4
General use A 25 A 10 Auxiliary contacts General Use IU Pilot Duty A 600 Switching capacity Maximum motor rating Single-phase 120 V AC HP 1.5 200 V AC HP 3 240 V AC HP 3 200 V AC HP 3 240 V AC HP 3 480 V AC HP 7.5 600 V AC HP 10 Three-phase Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 40 High fault rating kA 10 max.
PAGE 5
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. The speciﬁcations for the switchgear must be observed. 10.12 Electromagnetic compatibility Is the panel builder's responsibility. The speciﬁcations for the switchgear must be observed. 10.
PAGE 6
Dimensions 01/09/2020 Eaton 222855 ED2019 V63.
PAGE 7
Drilling dimensions base Assets (links) Declaration of CE Conformity 00003074 Instruction Leaﬂets IL03801008Z2018_05 01/09/2020 Eaton Industries GmbH http://www.eaton.eu © 12/2019 by Eaton Industries GmbH Eaton 222855 ED2019 V63.