Data Sheet

ManualsBrandsEaton ManualsActuatorsT0-4-15374/I1 Changeover switch 1 pc(s)

DATASHEET - T0-4-15374/I1

Changeoverswitches, T0, 20 A, surface mounting, 4 contact unit(s),

Contacts: 8, 45 °, momentary, With 0 (Oﬀ) position, with spring-return from

both directions to 0, 2>0<1, design no. 15374

Part no. T0-4-15374/I1

Catalog No. 222701



Similar to illustration

Delivery program

Product range   Control switches

Part group reference   T0

Basic function   Changeoverswitches

   with black thumb grip and front plate

Contacts   8

Degree of Protection   IP65

  

Design   surface mounting

  

Contact sequence  

Switching angle  ° 45

Switching performance   momentary

With 0 (Oﬀ) position

with spring-return from both directions to 0

Design number   15374

Front plate no.  

front plate   2>0<1

Motor rating AC-23A, 50 - 60 Hz

  

06/16/2021 Eaton 222701 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T0-4-15374/I1 Changeoverswitches, T0, 20 A, surface mounting, 4 contact unit(s), Contacts: 8, 45 °, momentary, With 0 (Oﬀ) position, with spring-return from both directions to 0, 2>0<1, design no. 15374 Part no. Catalog No.
PAGE 2
400 V Rated uninterrupted current P kW 5.5 Iu A 20 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section.
PAGE 3
Rated operational current motor load switch 230 V Ie A 11.5 230 V star-delta Ie A 20 400V 415 V Ie A 11.5 400 V star-delta Ie A 20 500 V Ie A 9 500 V star-delta Ie A 15.6 690 V Ie A 4.9 690 V star-delta Ie A 8.5 P kW 230 V P kW 3 400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Technical safety parameters: Notes B10d values as per EN ISO 13849-1, table C1 Rating data for approved types Terminal capacity Terminal screw M3.5 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 20 Heat dissipation per pole, current-dependent Pvid W 0.
PAGE 5
Suitable for ground mounting Yes Suitable for front mounting 4-hole No Suitable for distribution board installation No Suitable for intermediate mounting No Complete device in housing Yes Type of control element Toggle Front shield size 48x48 mm Degree of protection (IP), front side IP65 Degree of protection (NEMA), front side Other Dimensions 06/16/2021 Eaton 222701 ED2021 V80.
PAGE 6
Drilling dimensions base 06/16/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 222701 ED2021 V80.