Manualshelf

Data Sheet

ManualsBrandsEaton ManualsAutomationM22-E6 Mounting brackets 6 installation slots (Ø x H) 22 mm x 72 mm Grey 1 pc(s)
12
DATASHEET - M22-E6
Flush mounting plate, 6 mounting locations
Part no. M22-E6
Catalog No. 216547
Alternate Catalog
No.
M22-E6Q
EL-Nummer
(Norway)
4355789
Delivery program
Accessories Surface mounting enclosure
Basic function accessories Flush mounting plates
No legend plates possible with vertical arrangements
Degree of protection only in conjunction with a suitable enclosure and correct
mounting.
Aluminium light anodized, including M22-XE...
Number of locations Qty. 6
Degree of Protection IP40
Colour
grey
RAL Value RAL 7035
Connection to SmartWire-DT no
Technical data
General
Degree of Protection IP40
Ambient temperature
Open °C -25 - +70
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min. °C -25
Operating ambient temperature max. °C 70
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation Please enquire
10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard's requirements.
06/18/2021 Eaton 216547 ED2021 V80.0 EN 1 / 2

Summary of content (2 pages)