Data Sheet

Technical data
General
Standards   IEC/EN 60947
VDE 0660
Lifespan, mechanical Operations
x 10
6
> 0.1
Operating frequency Operations/h  ≦ 100
Operating torque  Nm ≦ 0.5
Climatic proofing   Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Degree of Protection   IP66
Ambient temperature   
Open  °C -25 - +70
Mounting position   As required
Mechanical shock resistance  g 30
Shock duration 11 ms
Sinusoidal
according to IEC 60068-2-27
Cable entry knockouts   
Base  Quantity
x M…
2 x 16
Sides  Quantity
x M…
1 x 20
2 x 25/20
shipping classification   DNV
GL
LR
  
Contacts
Rated conditional short-circuit current I
q
kA 1
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 6
Heat dissipation per pole, current-dependent P
vid
W 0.11
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 70
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
06/16/2021 Eaton 216526 ED2021 V80.0 EN 2 / 4