Data Sheet

DATASHEET - M22-PL-PV
Sealable shroud
Part no. M22-PL-PV
Catalog No. 216397
Alternate Catalog
No.
M22-PL-PVQ
EL-Nummer
(Norway)
4355416
Delivery program
Basic function accessories   Sealable shroud
   For devices with mushroom diameter 38 mm
transparent with collapse point, can be reused after Emergency-Stop, Emergency
switching off operation.
with grid 30 x 50 mm the drilling dimensions can be closed with M22(S)-B blanking
plug
Degree of Protection   IP65
Connection to SmartWire-DT   no
Technical data
General
Degree of Protection   IP65
Ambient temperature   
Open  °C -25 - +70
shipping classification   DNV
GL
LR
  
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 70
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
06/18/2021 Eaton 216397 ED2021 V80.0 EN 1 / 3