Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch lockable 10 A 690 V 1 x 90 ° Black TM-1-8291/E/SVB-SW 1 pc(s)

DATASHEET - TM-1-8291/E/SVB-SW

Control circuit switches, TM, 10 A, ﬂush mounting, Contacts: 2, STOP

function, With black rotary handle and locking ring, Lockable in the 0

(Oﬀ) position

Part no. TM-1-8291/E/SVB-SW

Catalog No. 215352



Delivery program

Product range   Control switches

Part group reference   TM

Basic function   Control circuit switches

Stop Function   STOP function

   With black rotary handle and locking ring

Notes   up to 250 V AC per contact

Contacts   2

Locking facility   Lockable in the 0 (Oﬀ) position

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Switching angle  ° 90

Design number   8291

Front plate no.  

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 3

Rated uninterrupted current I

A 10

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, CSA, UL

Control switch as per IEC/EN 60947-5-1

Auxiliary switch as per IEC/EN 60947-5-1

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

Overvoltage category/pollution degree   III/3

Rated impulse withstand voltage U

imp

V AC 4000

06/18/2021 Eaton 215352 ED2021 V80.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - TM-1-8291/E/SVB-SW Control circuit switches, TM, 10 A, ﬂush mounting, Contacts: 2, STOP function, With black rotary handle and locking ring, Lockable in the 0 (Oﬀ) position Part no. Catalog No.
PAGE 2
Mounting position As required Contacts Electrical characteristics Rated operational voltage Ue V AC 500 Rated uninterrupted current Iu A 10 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section. Short-circuit rating Fuse A gG/gL 10 Switching capacity Safe isolation to EN 61140 Current heat loss per contact at Ie W 0.15 Current heat loss per auxiliary circuit at Ie (AC-15/230 V) CO 0.
PAGE 3
Rated operational current for speciﬁed heat dissipation In A 10 Heat dissipation per pole, current-dependent Pvid W 0.15 Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 50 IEC/EN 61439 design veriﬁcation 10.2 Strength of materials and parts 10.2.
PAGE 4
Number of poles 2 Number of auxiliary contacts as normally closed contact 0 Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as change-over contact 0 Motor drive optional No Motor drive integrated No Voltage release optional No Device construction Built-in device ﬁxed built-in technique Suitable for ground mounting No Suitable for front mounting 4-hole Yes Suitable for front mounting centre No Suitable for distribution board installation No Suitabl
PAGE 5
Door drilling dimensions 2 padlocks with a diameter of 4 mm or 1 padlock with a diameter of 6 mm 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 215352 ED2021 V80.