Datasheet

ManualsBrandsEaton ManualsCircuit BreakersP3-100/I5/SVB/N MR switch for floor mounting, lockable 690 V Red 1 pc(s)

DATASHEET - P3-100/I5/SVB/N

Main switch, P3, 100 A, surface mounting, 3 pole + N, Emergency

switching oﬀ function, With red rotary handle and yellow locking ring,

Lockable in the 0 (Oﬀ) position

Part no. P3-100/I5/SVB/N

Catalog No. 207379



EL-Nummer

(Norway)

0001417169

Delivery program

Product range   Main switch

maintenance switch

Repair switch

Part group reference   P3

Stop Function   Emergency switching oﬀ function

   With red rotary handle and yellow locking ring

Information about equipment supplied   auxiliary contact ﬁtted by user.

Number of poles   3 pole + N

Auxiliary contacts

  

  N/O 0

  N/C 0

Locking facility   Lockable in the 0 (Oﬀ) position

Degree of Protection   IP65

  

Design   surface mounting

  

Contact sequence  

Switching angle  ° 90

Function  

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 55

Rated uninterrupted current I

A 100

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

06/16/2021 Eaton 207379 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - P3-100/I5/SVB/N Main switch, P3, 100 A, surface mounting, 3 pole + N, Emergency switching oﬀ function, With red rotary handle and yellow locking ring, Lockable in the 0 (Oﬀ) position Delivery program Part no. Catalog No.
PAGE 2
Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Mechanical variables Number of poles 3 pole + N Auxiliary contacts N/O 0 N/C 0 Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 100 Note on rated uninterrupted current !u Rated uninterrupted cu
PAGE 3
690 V P kW 55 230 V Ie A 100 400 V 415 V Ie A 100 500 V Ie A 96 690 V Ie A 68 Ie A 100 V 60 A 50 Rated operational current motor load switch DC DC-1, Load-break switches L/R = 1 ms Rated operational current Voltage per contact pair in series DC-23A, motor load switch L/R = 15 ms 24 V Rated operational current Ie Contacts Quantity 1 48 V Rated operational current Ie Contacts A 50 Quantity 2 60 V Rated operational current Ie Contacts A 50 Quantity 2 120 V Rated oper
PAGE 4
max. Fuse A 150 AWG 14 - 2 Terminal capacity Solid or ﬂexible conductor with ferrule Terminal screw M5 Tightening torque lb-in 26.5 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 100 Heat dissipation per pole, current-dependent Pvid W 7.
PAGE 5
Rated permanent current Iu A 100 Rated permanent current at AC-23, 400 V A 100 Rated permanent current at AC-21, 400 V A 100 Rated operation power at AC-3, 400 V kW 37 Rated short-time withstand current lcw kA 2 Rated operation power at AC-23, 400 V kW 55 Switching power at 400 V kW 55 Conditioned rated short-circuit current Iq kA 4 Number of poles 4 Number of auxiliary contacts as normally closed contact 0 Number of auxiliary contacts as normally open contact 0 Number of auxil
PAGE 6
≦ 3 padlocks 06/16/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 207379 ED2021 V80.