Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 32 A 1 x 90 ° Grey, Black P1-32/I2 1 pc(s)

DATASHEET - P1-32/I2

On-Oﬀ switch, 3 pole, 32 A, surface mounting

Part no. P1-32/I2

Catalog No. 207320



EL-Nummer

(Norway)

0001456114

Delivery program

Product range   On-Oﬀ switch

Part group reference   P1

   with black thumb grip and front plate

Information about equipment supplied   Auxiliary contact or neutral conductor ﬁtted by user.

Number of poles   3 pole

Auxiliary contacts

  

  N/O 0

  N/C 0

Degree of Protection   IP65

  

Design   surface mounting

  

Contact sequence  

Switching angle  ° 90

Front plate no.  

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 15

Rated uninterrupted current I

A 32

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

06/18/2021 Eaton 207320 ED2021 V80.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - P1-32/I2 On-Oﬀ switch, 3 pole, 32 A, surface mounting Part no. Catalog No. P1-32/I2 207320 EL-Nummer (Norway) 0001456114 Delivery program Product range On-Oﬀ switch Part group reference P1 with black thumb grip and front plate Information about equipment supplied Auxiliary contact or neutral conductor ﬁtted by user.
PAGE 2
Switch-disconnector according to IEC/EN 60947-3 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Enclosed °C -25 - +40 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Mechanical variables Number of poles 3 pole Auxiliary contacts N/O 0 N/C 0 Electrical characteristics Rated operational voltage Ue V AC 690 R
PAGE 3
400 V 415 V P kW 15 500 V P kW 18.5 690 V P kW 15 230 V Ie A 32 400 V 415 V Ie A 32 500 V Ie A 30 690 V Ie A 19.
PAGE 4
Short Circuit Current Rating SCCR Basic Rating kA 5 max. Fuse A 110 High fault rating kA 10 max. Fuse A 50, Class J AWG 14 - 8 Terminal capacity Solid or ﬂexible conductor with ferrule Terminal screw M4 Tightening torque lb-in 14.1 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 32 Heat dissipation per pole, current-dependent Pvid W 1.
PAGE 5
Version as reversing switch No Number of switches 1 Max. rated operation voltage Ue AC V 690 Rated operating voltage V 690 - 690 Rated permanent current Iu A 32 Rated permanent current at AC-23, 400 V A 32 Rated permanent current at AC-21, 400 V A 32 Rated operation power at AC-3, 400 V kW 13 Rated short-time withstand current lcw kA 0.