Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 20 A 690 V 1 x 90 ° Black T0-2-8900/I1/SVB-SW 1 pc(s)

DATASHEET - T0-2-8900/I1/SVB-SW

Main switch, T0, 20 A, surface mounting, 2 contact unit(s), 3 pole + N,

STOP function, With black rotary handle and locking ring, Lockable in

the 0 (Oﬀ) position

Part no. T0-2-8900/I1/SVB-SW

Catalog No. 207152



Delivery program

Product range   Main switch

maintenance switch

Repair switch

Part group reference   T0

Stop Function   STOP function

   With black rotary handle and locking ring

Number of poles   3 pole + N

Locking facility   Lockable in the 0 (Oﬀ) position

Degree of Protection   IP65

  

Design   surface mounting

  

Contact sequence  

Switching angle  ° 90

Design number   8900

Function  

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Enclosed  °C -25 - +40

Overvoltage category/pollution degree   III/3

Rated impulse withstand voltage U

imp

V AC 6000

06/18/2021 Eaton 207152 ED2021 V80.0 EN 1 / 7

Summary of content (7 pages)

PAGE 1
DATASHEET - T0-2-8900/I1/SVB-SW Main switch, T0, 20 A, surface mounting, 2 contact unit(s), 3 pole + N, STOP function, With black rotary handle and locking ring, Lockable in the 0 (Oﬀ) position Part no. Catalog No.
PAGE 2
Mechanical shock resistance g 15 Mounting position As required Contacts Mechanical variables Number of poles 3 pole + N Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 20 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section. Load rating with intermittent operation, class 12 AB 25 % DF x Ie 2 AB 40 % DF x Ie 1.6 AB 60 % DF x Ie 1.
PAGE 3
400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 40 IEC/EN 61439 design veriﬁcation 10.2 Strength of materials and parts 10.2.2 Corrosion resistance Meets the product standard's requirements. 10.2.3.1 Veriﬁcation of thermal stability of enclosures Meets the product standard's requirements. 10.2.3.2 Veriﬁcation of resistance of insulating materials to normal heat Meets the product standard's requirements. 10.2.3.
PAGE 5
Motor drive integrated No Voltage release optional No Device construction Complete device in housing Suitable for ground mounting Yes Suitable for front mounting 4-hole No Suitable for front mounting centre No Suitable for distribution board installation No Suitable for intermediate mounting No Colour control element Black Type of control element Door coupling rotary drive Interlockable Yes Type of electrical connection of main circuit Screw connection Degree of protection (IP), fron
PAGE 6
Drilling dimensions base 06/18/2021 Eaton 207152 ED2021 V80.
PAGE 7
≦ 3 padlocks 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 207152 ED2021 V80.