Data Sheet

Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 40
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   UV resistance only in connection with protective shield.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Off-load switch (EC001105)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Changeover switch (ecl@ss10.0.1-27-37-14-05
[AKF062013])
Model   Reverser
Number of poles   3
With 0 (off) position   Yes
With retraction in 0-position   No
Rated permanent current Iu  A 20
Rated operation current Ie at AC-3, 400 V  A 11.5
Rated operation power at AC-3, 400 V  kW 4
Degree of protection (IP), front side   IP65
Degree of protection (NEMA), front side   Other
Number of auxiliary contacts as normally closed contact   0
Number of auxiliary contacts as normally open contact   0
Number of auxiliary contacts as change-over contact   0
Suitable for ground mounting   Yes
Suitable for front mounting 4-hole   No
Suitable for distribution board installation   No
Suitable for intermediate mounting   No
Complete device in housing   Yes
Material housing   Plastic
Type of control element   Toggle
Type of electrical connection of main circuit   Screw connection
06/18/2021 Eaton 207123 ED2021 V80.0 EN 4 / 6