Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 10 A Grey, Black TM-2-8550/E 1 pc(s)

DATASHEET - TM-2-8550/E

Coding switches, TM, 10 A, ﬂush mounting, 2 contact unit(s), Contacts: 4,

30 °, maintained, With 0 (Oﬀ) position, 0-9, design no. 8550

Part no. TM-2-8550/E

Catalog No. 020300



Delivery program

Product range   Control switches

Part group reference   TM

Basic function   Coding switches

   with black thumb grip and front plate

Contacts   4

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

switching function   BCD Code 0-9

Switching angle  ° 30

Switching performance   maintained

With 0 (Oﬀ) position

Design number   8550

Front plate no.  

front plate   0-9

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 3

Rated uninterrupted current I

A 10

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, CSA, UL

Control switch as per IEC/EN 60947-5-1

Auxiliary switch as per IEC/EN 60947-5-1

06/18/2021 Eaton 020300 ED2021 V80.0 EN 1 / 4

Summary of content (4 pages)

PAGE 1
DATASHEET - TM-2-8550/E Coding switches, TM, 10 A, ﬂush mounting, 2 contact unit(s), Contacts: 4, 30 °, maintained, With 0 (Oﬀ) position, 0-9, design no. 8550 Part no. Catalog No.
PAGE 2
Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +50 Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp V AC Mounting position 4000 As required Contacts Electrical characteristics Rated operational voltage Ue V AC 500 Rated uninterrupted current Iu A 10 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section.
PAGE 3
Solid or ﬂexible conductor with ferrule AWG Terminal screw 14 M2.5 Tightening torque lb-in 3.5 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 10 Heat dissipation per pole, current-dependent Pvid W 0.15 Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min.
PAGE 4
Suitable for front mounting 4-hole Yes Suitable for distribution board installation No Suitable for intermediate mounting No Complete device in housing No Type of control element Toggle Front shield size 30x30 mm Degree of protection (IP), front side IP65 Degree of protection (NEMA), front side Other Approvals Product Standards UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking UL File No. E36332 UL Category Control No. NLRV CSA File No.