Datasheet

DATASHEET - EASY-BOX-E4-AC1-IV
easyE4 control relay, pre-programmed with 3 functions - impulse relay,
staircase timer, astronomical timer, 4 channels, 230 VAC
Part no. EASY-BOX-E4-AC1-IV
199781
Product name Eaton Moeller® series EASY Starter kit
Part no. EASY-BOX-E4-AC1-IV
EAN 4015081994229
Product Length/Depth 58 millimetre
Product height 90 millimetre
Product width 72 millimetre
Product weight 0.251 kilogram
Certifications IEC 60068-2-27
EN 55011
EN 55022
IEC/EN 61000-4-2
IEC 60068-2-6
IEC/EN 61000-4
Product Tradename EASY
Product Type Starter kit
Product Sub Type None
Catalog Notes depending on ambient air temperature fluctuations of up to ± 5 s/day (± 0.5 h⁄year)
are possible
Fitted with: Basic device
Software preinstalled
Application Note
Insulation resistance According to EN 50178
Mounting method Screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Top-hat rail fixing (according to IEC/EN 60715, 35 mm)
Overvoltage category III
Pollution degree 2
Type Starter kit
Drop and topple 50 mm Drop height, Drop to IEC/EN 60068-2-31
Mounting position Horizontal
Vertical
Shock resistance 15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18
Impacts
Air pressure 795 - 1080 hPa (operation)
Environmental conditions Clearance in air and creepage distances according to EN 50178, UL 508, CSA C22.2,
No. 142
Condensation: prevent with appropriate measures
Relative humidity 5 - 95 % (IEC 60068-2-30, IEC 60068-2-78)
Air discharge 8 kV
Contact discharge 6 kV
Immunity to line-conducted interference 10 V (according to IEC/EN 61000-4-6)
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements.
10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated.
06/21/2023 Eaton 199781 ED2023 V1.0 EN 1 / 3

Summary of content (3 pages)