Data Sheet

Battery (service life) non-replaceable, CR2032 soldered in
Engineering
Visualisation software GALILEO
PLC-licence no PLC function possible
Operating system Windows CE 5.0 (licence incl.)
Interfaces, communication
built-in interfaces 1 x Ethernet 100base-TX/10base-T
1 x USB host 2.0
USB Host USB 2.0 (1.5 - 12 Mbit/s), not galvanically isolated
Slots for SD card: 1
Ethernet 100Base-TX/10Base-T
Power supply
Nominal voltage 24 V DC SELV (safety extra low voltage)
Note on power consumption Basic device
USB Slave to USB Host: 2.5
Total: 9.5
Heat dissipation W 5
Note on heat dissipation Heat dissipation with power consumption for 24 V, all ports and interfaces
connected
Protection against polarity reversal yes
Type of fuse Yes (fuse not accessible)
Potential isolation no potential isolation
General
Housing material Plastic, gray
Front type Standard front with standard membrane (fully enclosed)
Dimensions (W x H x D) mm 136 x 100 x 30
flush mounted Clearance: W x H x D ≥ 30 mm (1.18")
Inclination from vertical: ±45° (if using natural convection)
Weight kg 0.3
Degree of protection (IEC/EN 60529, EN50178, VBG 4) IP65 (at front), IP20 (at rear)
Approvals
Approvals cUL (UL508)
EAC
Applied standards and directives
Explosion protection (relevant for CE) EN 60079-0
EN 61241-1
EN 13463_x
Mechanical shock resistance g according to IEC 60068-2-27
Vibration according to IEC/EN 60068-2-6
RoHS conform
Environmental conditions
Climatic environmental conditions
Air pressure (operation) hPa 795 - 1080
Temperature
Operating ambient temperature min. °C 0
Operating ambient temperature max. °C + 50
Relative humidity
Relative humidity 10 - 90%, non condensing
Supply voltage U
Aux
Rated operational voltage U
Aux
V 24 V DC (-20/+25%)
Protection against polarity reversal Yes
Potential isolation No
Design verification as per IEC/EN 61439
Technical data for design verification
Static heat dissipation, non-current-dependent P
vs
W 5
Operating ambient temperature min. °C 0
Operating ambient temperature max. °C 50
IEC/EN 61439 design verification
10.2 Strength of materials and parts
06/16/2021 Eaton Y7-198513 ED2021 V80.0 EN 2 / 6